DIN Material No. - ROLEX MATERIALS CORPORATION - A/SA106-B/C, A/SA333-6, ASTM A671, ASTM A672, API 5L X52 PIPES

DIN Material No.

UNALLOYED STRUCTURAL STEEL PLATES

If you wish to employ hot-rolled products made of structural steel according to DIN EN 10025 or DIN EN 10025-2 respectively, our unalloyed structural steel will be the right choice.

	DIN-Code	Material no.	Certificate	Plate thickness in mm	Width in mm	Length in mm
old new	S 235 JRG2 S 235 JR	1.0038	3.1 acc. to EN 10204 AD 2000 W1	3 - 250	1000 - 4000	up to	16000
old new	S 235 J2G3 S 235 J2	1.0116 1.0117	3.1 acc. to EN 10204 AD 2000 W1	3 - 250	1000 - 4000	up to	16000
old new	S 235 JRG2 C S 235 JR C	1.0122	3.1 acc. to EN 10204 AD 2000 W1	5 - 200	1000 - 3500	up to	16000
old new	S 355 J2G3 S 355 J2	1.0570 1.0577	3.1 acc. to EN 10204 AD 2000 W1	3 - 300	1000 - 4000	up to	16000
old new	S 355 J2G3 C S 355 J2 C	1.0569 1.0579	3.1 acc. to EN 10204 AD 2000 W1	3 - 200	1000 - 3000	up to	16000

FINE GRAIN STRUCTURAL STEEL PLATES

In this category you find hot-rolled products of weldable fine grain structural steel (normal annealed/hot-rolled annealed) according to DIN EN 10113-2 or DIN EN 10025-3 respectively.

DIN-code	Material no.	Certificate	Plate thickness in mm	Width in mm	Length in mm
S 275 N	1.0490	3.1 acc. to EN 10204	5 - 130	1000 - 4000	up to	16000
S 275 NL	1.0491	3.1 acc. to EN 10204	5 - 130	1000 - 4000	up to	16000
S 355 N	1.0545	3.1 acc. to EN 10204	3 - 150	1000 - 4000	up to	16000
S 355 NL	1.0546	3.1 acc. to EN 10204	3 - 150	1000 - 4000	up to	16000
S 460 N	1.8901	3.1 acc. to EN 10204	3 - 150	1000 - 4000	up to	16000
S 460 NL	1.8903	3.1 acc. to EN 10204	3 - 150	1000 - 4000	up to	16000

PRESSURE TANK STEEL DIN EN 10028-2 PLATES

Pressure tank steel can be unalloyed or alloyed steel with clearly fixed properties. These steel types are particularly suitable for application at high temperatures.

DIN-Code	Material no.	Certificate	Plate thickness in mm	Width in mm	Length in mm
P 265 GH	1.0425	3.1B acc. to EN 10204 AD 2000 W1	3 - 300	1000 - 4000	up to	16000
P 295 GH	1.0481	3.1A TÜV acc. to EN 10204 AD 2000 W1	5 - 120	1000 - 3500	up to	14000
16 Mo 3	1.5415	3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1	1,5 - 300	1000 - 3000	up to	14000
13 CrMo 4-5	1.7335	3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1	3 - 160	1000 -3000	up to	12000
10 CrMo 9-10	1.7380	3.1A TÜV acc. to EN 10204 AD 2000 W1	3 - 120	1000 - 3000	up to	12000

PRESSURE TANK STEEL DIN EN 10028-3 PLATES

This list shows you weld able fine grain structural steel types that are annealed the normal way.

DIN-Code	Material no.	Certificate	Plate thickness in mm	Width in mm	Length in mm
P 275 NH	1.0487	3.1B acc. to EN 10204	5 - 130	1000 - 4000	up to	16000
P 275 NL1	1.0488	3.1B acc. to EN 10204	5 - 130	1000 - 4000	up to	16000
P 275 NL2	1.1104	3.1B acc. to EN 10204	5 - 130	1000 - 4000	up to	16000
P 355 N	1.0562	3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1/W10	3 - 220	1000 - 4000	up to	16000
P 355 NH	1.0565	3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1/W10	3 - 220	1000 - 4000	up to	16000
P 355 NL1	1.0566	3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1/W10	3 - 220	1000 - 4000	up to	16000
P 355 NL2	1.1106	3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1/W10	3 - 220	1000 - 4000	up to	16000
P 460 NH	1.8935	3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1/W10	4 - 180	1000 - 3000	up to	14000
P 460 NL1	1.8915	3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1/W10	4 - 180	1000 - 3000	up to	14000
P 460 NL2	1.8918	3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1/W10	4 - 180	1000 - 3000	up to	14000

PRESSURE HYDROGEN RESISTANT STEEL PLATES

These are steel types that are alloyed with Cr and partly with Mo, Ni, V or W. They have especially been developed for work pieces that are exposed to hydrogen such as in the ammonia synthesis, carbo-hydrogenation or crude oil processing.

DIN-Code	Material no.	Certificate	Plate thickness in mm	Width in mm	Length in mm
12 CrMo 19 5	1.7362	3.1A TÜV acc. to EN 10204 AD 2000 W1	5 - 80	1000 - 3000	up to	12000

HEAT TREATED PLATES

Heat treated plates of high tensile fine grain structural steel DIN EN 10025-6 / DIN EN 10137-2
These steel types are employed for welded steel structures such as in manufacture of vehicles and mobile cranes. Further major applications are mining equipment, pressure tanks and pressure pipes.

DIN-Code	Material no.	Certificate	Plate thickness in mm	Width in mm	Length in mm
S 690 QL	1.8928	3.1B acc. to EN 10204	3 - 200	1000 - 3000	up to	15000
Maxil 690 (Salzgitter), Naxtra 70 (ThyssenKrupp Stahl), Dillimax 690T (Dillinger Hütte), Supralsim 690 (FaFer), Weldox 700E (SSAB)
S 890 QL	1.8983	3.1B acc. to EN 10204	4 - 120	1000 - 3000	up to	16000
Maxil 890 (Salzgitter), Xabo 890 (ThyssenKrupp Stahl), Dillimax 890T (Dillinger Hütte), Supralsim 890 (FaFer), Weldox 900E (SSAB)
S 960 QL	1.8933	3.1B acc. to EN 10204	4 - 100	1000 - 3000	up to	12000
Maxil 960 (Salzgitter), Xabo 960 (ThyssenKrupp Stahl), Dillimax 965T (Dillinger Hütte), Superelso 960 Q (FaFer), Weldox 960E (SSAB)

STEEL WITH HIGH YIELD POINT PLATES

Steel with high yield point for cold working DIN EN 10149-2
Here you find special steel types for cold working, such as for further processing of side bars and cross members, axle structures and other special profiles used e.g. in manufacture of vehicles. Here you find special steel types for cold working, such as for further processing of side bars and cross members, axle structures and other special profiles used e.g. in manufacture of vehicles.

DIN-Code	Material no.	Certificate	Plate thickness in mm	Width in mm	Length in mm
S 700 MC	1.8974	3.1B acc. to EN 10204	2,5 - 25	1000 - 2500	up to	12000

HEAT TREATABLE AND CASE HARDENING STEEL PLATE

Our heat treatable steel according to DIN EN 10083-1 and -2 comprises steel types used in mechanical engineering and suitable for tempering due to their chemical composition.

Case hardening steel according to DIN EN 10084 covers steel types of relatively low carbon content, destined for carbonising or carbo-nitrating with subsequent tempering.

DIN-Code
Material no. Cerificate
Plate thickness
in mm
Width in mm Length in mm

C 45
1.0503 3.1B acc. to EN 10204 2 - 150 1000 - 3000 up to 14000

C 60
1.0601 3.1B acc. to EN 10204 2 - 150 1000 - 3000 up to 12000

42 CrMo 4

1.7225 3.1B acc. to EN 10204 3 - 200 1000 - 2500 up to 14000

16 MnCr 5
1.7131 3.1B acc. to EN 10204 3 - 200 1000 -2500 up to 12000

20 MnCr 5
1.7147 3.1B acc. to EN 10204 3 - 200 1000 - 2500 up to 12000

MANGANESE STEEL PLATES

This steel quality is used for wear resistant pieces under shock and pressure loads – e.g. for crusher plates, wearing edges of machines removing overburden of open cast mines, and for walls and core pieces of concrete stone moulds.

DIN-Code
Material no. Certificate Plate thickness
in mm
Width in mm
Length in mm

X 120 Mn 12
1.3401 3.1B acc. to EN 10204 1,5 - 40 1000 - 2000 up to 6000

WEAR RESISTANT STEEL PLATES

Fields of application for these steel types are e.g. construction machinery, conveying plants, dumper troughs, transport and crushing plants etc.

DIN-Code Material no. Certificate Plate thickness
in mm
Width in mm
Length in mm

37 Mn 7 / Semi-Manax
      3.1B acc. to EN 10204 3 - 40 1000 - 1500 up to 6000

VSS 295 / PS 265 H
   1.8704 3.1B acc. to EN 10204
3 - 75 1000 - 3000 up to 12000

Water hardened 400 HB Steel      3.1B acc. to EN 10204 3 - 120 1000 - 3000 up to 12000

Brinar 400 (Salzgitter), XAR 400 (ThyssenKrupp Stahl), Dillidur 400 V (Dillinger Hütte), Fora 400 (FaFer)

Air hardened 400 HB Steel   1.8709 3.1B acc. to EN 10204
5 - 120 1000 - 3000 up to 12000

Brinar 400 Cr (Salzgitter)


Water hardened 500 HB Steel       3.1B acc. to EN 10204 5 - 100 1000 -3000 up to 12000

Brinar 500 (Salzgitter), XAR 500 (ThyssenKrupp Stahl)


Water hardened 500 HB Steel with
increased chromium content
1.8710
3.1B acc. to EN 10204 6 - 60 1000 - 3000 up to 12000

Brinar 500 Cr (Salzgitter)


STEEL PLATES ACCORDING TO ASTM/ASME STANDARD

Grade   Certificate Plate thickness
in mm
Wiidth in mm
Length in mm

A / SA 516 Gr. 60
3.1B acc. to EN 10204 3 - 300 1000 - 4000 up to 16000

A / SA 516 Gr. 70
3.1B acc. to EN 10204 3 - 220 1000 - 4000 up to 16000

A / SA 387 Gr. 11 Cl. 2
3.1B acc. to EN 10204 6 - 60 1000 - 3000 up to 12000

A / SA 387 Gr. 12 Cl. 2
3.1B acc. to EN 10204 3 - 150 1000 -3000 up to 12000

A / SA 387 Gr. 22 Cl. 2
3.1B acc. to EN 10204 4 - 120 1000 - 2500 up to 12000

A / SA 283 Gr. C
3.1B acc. to EN 10204 3 - 120 1000 - 2500 up to 12000

A / SA 285 Gr. C
3.1B acc. to EN 10204 3 - 120 1000 - 2500 up to 12000

A / SA 387 Gr. 5 Cl. 2
3.1B acc. to EN 10204 5 - 80 1000 - 2500 up to 12000

OFFSHORE SPECIAL GRADE PLATES

These are weld able structural steel types for application in stationary structures in coastal areas according to BS 7191.

DIN-Code
   Certificate Plate thickness
in mm
Width in mm
Length in mm

EMZ 355
3.1C LRS acc. to EN 10204 10 - 200 1000 - 3050 up to 12000

API 2H Gr. 50
3.1 acc. to EN 10204 10 - 200 1000 - 3050 up to 12000

SHIP-BUILDING GRADE PLATES

Ship-building grades according to classification institutions

DIN-Code
Certificate
Plate thickness
in mm
Width in mm
Length in mm

Schiffbaugüte Gr. A 3.1C acc. to EN 10204
GL, LRS, DNV, ABS, BV, RINA
3 - 200 1000 - 4000 up to 16000

Schiffbaugüte Gr. B 3.1C acc. to EN 10204
GL, LRS, DNV, ABS, BV, RINA
3 - 200 1000 - 4000 up to 16000

Schiffbaugüte Gr. D 3.1C acc. to EN 10204
GL, LRS, DNV, ABS, BV, RINA
3 - 200 1000 - 4000 up to 16000

Schiffbaugüte Gr. E 3.1C acc. to EN 10204
GL, LRS, DNV, ABS, BV, RINA
3 - 200 1000 - 4000 up to 16000

Schiffbaugüte Gr. A 32 3.1C acc. to EN 10204
GL, LRS, DNV, ABS, BV, RINA
3 - 200 1000 - 4000 up to 16000

Schiffbaugüte Gr. D 32 3.1C acc. to EN 10204
GL, LRS, DNV, ABS, BV, RINA
3 - 200 1000 - 4000 up to 16000

Schiffbaugüte Gr. E 32 3.1C acc. to EN 10204
GL, LRS, DNV, ABS, BV, RINA
3 - 200 1000 - 4000 up to 16000

Schiffbaugüte Gr. A 36 3.1C acc. to EN 10204
GL, LRS, DNV, ABS, BV, RINA
3 - 200 1000 - 4000 up to 16000

Schiffbaugüte Gr. D 36 3.1C acc. to EN 10204
GL, LRS, DNV, ABS, BV, RINA
3 - 200 1000 - 4000 up to 16000

Schiffbaugüte Gr. E 36 3.1C acc. to EN 10204
GL, LRS, DNV, ABS, BV, RINA
3 - 200 1000 - 4000 up to 16000

Schiffbaugüte Gr. E 40
   3.1C acc. to EN 10204
GL, LRS, DNV, ABS, BV, RINA 6 - 60 2000 - 3500 up to 16000

Grades DH 36 and EH 36 are also available as TM steel

HOT-ROLLED FLATS BULB STEEL

Hot-rolled flat bulb steel - HP-profiles
This flat steel ranks among hot-rolled profiles (former “Dutch profile”) and shows on one broadside a bulb over its entire length.

DIN-Code Certificate Dimensions Length in mm

Schiffsbaugüte Gr. A 3.1C acc. to EN 10204
GL, LRS, DNV, ABS, BV, RINA 80 x 5 - 430 x 17 12000 / 16000

Schiffsbaugüte Gr. A 36 3.1C acc. to EN 10204
GL, LRS, DNV, ABS, BV, RINA 80 x 5 - 430 x 17 12000 / 16000

Schiffsbaugüte Gr. D 36 3.1C acc. to EN 10204
GL, LRS, DNV, ABS, BV, RINA 80 x 5 - 430 x 17 12000 / 16000

Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN10204 3.1 Mill Test Certificate, NACE MR-0175 / ISO 15156, European Pressure Equipment Directive PED-97/23/EC, AD-2000-WO, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, API 6A, with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), SGS, TUV, ABS, RINA, IRS, NORSOK Approved

If you have any requirement of above items, please feel free to contact us

Regards,

CONTACT PERSON :

MUKESH SHAH
Director
Mobile No. 0091 - 9820292499
E-MAIL - rolexmetal@vsnl.net

ROLEX MATERIALS CORPORATION
( A METAL & STEEL Company )
57-A, KHATARGALLI,
THAKURDWAR,
MUMBAI - 400002, INDIA.
TEL.No. 0091-22-23858802
TEL.No. 0091-22-23823963
FAX No. 0091-22-23898724
email - rolexmetal@vsnl.net
website : www.rolexmaterials.com