Home
Company Profile
E-Mail Address
Product Catalog
Pipe/Tube
Hollow Section
Fitting/Flange
Sheet/Plate/Coil
Hot Rolled Steel Plate
Hot Rolled Steel Sheet
Hot Rolled Coil
Rod/Bar/Wire Rod
Bars For Oil & Gas
Forged Round Bar
Hexagonal Bar
Square Bar
Cold Drawn Bar
Forged Block/Circle
Structural Steel
Flat Bar/Strip
Stud/Bolt/Nut
Threaded Bar/Rod
Fastener
SA193 B7 Stud Bolt
SA193 B16 Stud Bolt
SA194 2H HEX NUT
Corten-A/Corten-B
SAILCOR IRSM41-97
Spring Steel Bar
Boiler/PVQ Plate
Structural Plate
Alloy Steel Plate
Ship Building Plate
LR Grade A/B Plate
ABS Grade A/B Plate
DNV Grade A/B Plate
BV Grade-A/B Plate
SABS 1431:1987 Steel
Q&T Steel Plate
Plates Size & Grade
SA516 60/70 HIC Plate
ASTM A516-60/70 Plate
ASTM A515-60/70 Plate
ST 52-3 DIN 17100
S355J2G3 EN 10025-2
S355K2G3 EN 10025-2
S355J2+N EN 10025-2
S355K2+N EN 10025-2
EN10025-2 Plate
EN10028-2/3 Plate
Abrasion Resistant Steel
Wear Resistant Steel
Hardox 400/450 Plate
Hardox 500/600 Plate
Weldox 700 Plate
SAILMA-350/350HI Plate
SAILMA-410/410HI Plate
SAILMA-450/450HI Plate
Seamless Pipe/Tube
Welded Pipe/Tube
ERW/EFW Pipe/Tube
SAW/HFW Pipe
ASME SA234/ASTM A234
ASME SA403/ASTM A403
ASME SA420/ASTM A420
ASME SA860/ASTM A860
Long Radius Bend
Hot Induction Bend
Forged Fitting
Forged Flange
API-5L Line Pipe
API-5L Gr.B PSL-1/2 Pipe
API-5L X-42 PSL-1/2 Pipe
API-5L X-46 PSL-1/2 Pipe
API-5L X-52 PSL-1/2 Pipe
API-5L X-56 PSL-1/2 Pipe
API-5L X-60 PSL-1/2 Pipe
API-5L X-65 PSL-1/2 Pipe
API-5L X-70 PSL-1/2 Pipe
High Speed Steel
Cold Work Tool Steel
Hot Work Tool Steel
Plastic Moulding Steel
BS 970 Specification
SAE Specification
JIS Specification
ASTM Standard Spec
ASME Standard Spec
Aerospace Alloy Spec
Equivalent Grade
Equivalent Grade
Equivalent Standard
Equivalent Standard
Technical Specification
DIN Material No.
Mechanical Properties
Mechanical Properties
Chemical Composition
Density
Contact Us
E-Mail Address
Links
News

Product Catalog 

Manufacture Stockholder Distributor of EN Materials

  • Manufacture Stockholder Distributor of EN Materials
  • Manufacture Stockholder Distributor of EN Materials
  • Manufacture Stockholder Distributor of EN Materials
  • Manufacture Stockholder Distributor of EN Materials
  • Manufacture Stockholder Distributor of EN Materials
  • Manufacture Stockholder Distributor of EN Materials
  • Manufacture Stockholder Distributor of EN Materials
  • Manufacture Stockholder Distributor of EN Materials
  • Manufacture Stockholder Distributor of EN Materials
  • Manufacture Stockholder Distributor of EN Materials
Model No.︰EN Standards
Brand Name︰Manufacture Stockholder Distributor of EN Material
Country of Origin︰Germany
Unit Price︰-
Minimum Order︰-
Share on:

 Total 362 Related Items 
Prev6364656667Next

Product Description

Manufacture Stockholder Distributor of EN Materials


We are Manufacture, Stockholder & Distributors of EN Standard Materials, EN Standard Products, EN Approved Materials, EN Approved Products, DIN Standard Materials, DIN Standard Products, DIN Approved Materials, DIN Approved Products, ISO Standard Materials, ISO Standard Products, ISO Approved Materials, ISO Approved Products Pipes, Tubes, Sheets, Plates, Strips, Coils, Wires, Wire-Rod, Rods, Bars, Round, Square, Hex, Hexagonal, Nuts, Bolts, Washers, Fasteners, Fittings, Electrodes, Filler Wire, TMT Bar, Cold Drawn, Hot Rolled, Hot Forged, Cold Forging, Forgings, Castings, CNC Machined, Components, Wire Rope, Strands, Annealed, Normalized, Hardened & Tempered

 

Standard No Title of Standard  
EN 10149-2:1996 Specification for hot-rolled flat products made of high yield strength steels for cold forming. Delivery conditions for thermomechanically rolled steels
EN 10149-3:1996 Specification for hot-rolled flat products made of high yield strength steels for cold forming. Delivery conditions for normalized or normalized rolled steels
EN 1015-1:1999 Methods of test for mortar for masonry. Determination of particle size distribution (by sieve analysis)
EN 10151:2002 Stainless steel strip for springs. Technical delivery conditions
EN 1015-10:1999 Methods of test for mortar for masonry. Determination of dry bulk density of hardened mortar
EN 1015-11:1999 Methods of test for mortar for masonry. Determination of flexural and compressive strength of hardened mortar
EN 1015-12:2000 Methods of test for mortar for masonry. Determination of adhesive strength of hardened rendering and plastering mortars on substrates
EN 1015-17:2000 Methods of test for mortar for masonry. Determination of water-soluble chloride content of fresh mortars
EN 1015-18:2002 Methods of test for mortar for masonry. Determination of water absorption coefficient due to capillary action of hardened mortar
EN 1015-19:1999 Methods of test for mortar for masonry. Determination of water vapour permeability of hardened rendering and plastering mortars
EN 1015-2:1999 Methods of test for mortar for masonry. Bulk sampling of mortars and preparation of test mortars
EN 10152:2003 Electrolytically zinc coated cold rolled steel flat products. Technical delivery conditions
EN 1015-21:2002 Methods of test for mortar for masonry. Determination of the compatibility of one-coat rendering mortars with substrates
EN 1015-3:1999 Methods of test for mortar for masonry. Determination of consistence of fresh mortar (by flow table)
EN 1015-4:1999 Methods of test for mortar for masonry. Determination of consistence of fresh mortar (by plunger penetration)
EN 1015-6:1999 Methods of test for mortar for masonry. Determination of bulk density of fresh mortar
EN 1015-7:1999 Methods of test for mortar for masonry. Determination of air content of fresh mortar
EN 1015-9:1999 Methods of test for mortar for masonry. Determination of workable life and correction time of fresh mortar
EN 10160:1999 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
EN 10162:2003 Cold rolled steel sections. Technical delivery conditions. Dimensional and cross-sectional tolerances
EN 10163-1:2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections. General requirements
EN 10163-2:2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections. Plate and wide flats
EN 10163-3:2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections. Sections
EN 10164:2004 Steel products with improved deformation properties perpendicular to the surface of the product. Technical delivery conditions
EN 10165:1996 Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state
EN 10168:2004 Steel products. Inspection documents. List of information and description
EN 10169-1:2003 Continuously organic coated (coil coated) steel flat products. General information (definitions, materials, tolerances, test methods)
EN 10169-3:2003 Continuously organic coated (coil coated) steel flat products. Products for building interior applications
EN 1017:1998 Chemicals used for treatment of water intended for human consumption. Half-burnt dolomite
EN 1018:1998 Chemicals used for treatment of water intended for human consumption. Calcium carbonate
EN 10184:1992 Specification for chemical analysis of ferrous materials. Determination of phosphorus in steels and irons. Spectrophotometric method
EN 1019:1996 Chemicals used for treatment of water intended for human consumption. Sulfur dioxide
EN 1020:1998 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, incorporating a fan to assist transportation of combustion
EN 10200:1992 Chemical analysis of ferrous materials. Determination of boron in steel. Spectrophotometric method
EN 10202:2001 Cold reduced tinmill products. Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel
EN 10204:2004 Metallic materials. Types of inspection documents
EN 10205:1992 Specification for cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steel
EN 10207:2005 Steels for simple pressure vessels. Technical delivery requirements for plates, strips and bars
EN 10208-1:1998 Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Pipes of requirement class A
EN 10208-2:1997 Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Pipes of requirement class B
EN 10209:1996 Cold rolled low carbon steel flat products for vitreous enamelling. Technical delivery conditions
EN 10210-1:1994 Hot finished structural hollow sections of non-alloy and fine grain structural steels. Technical delivery requirements
EN 10210-2:1997 Hot finished structural hollow sections of non-alloy and fine grain structural steels. Tolerances, dimensions and sectional properties
EN 1021-1:1994 Furniture. Assessment of the ignitability of upholstered furniture. Ignition source: smouldering cigarette
EN 10211:1996 Chemical analysis of ferrous materials. Determination of titanium in steel and iron. Flame atomic absorption spectrometric method
EN 1021-2:1994 Furniture. Assessment of the ignitability of upholstered furniture. Ignition source: match flame equivalent
EN 10212:1996 Chemical analysis of ferrous materials. Determination of arsenic in steel and iron. Spectrophotometric method
EN 10213-1:1996 Technical delivery conditions for steel castings for pressure purposes. General
EN 10213-2:1996 Technical delivery conditions for steel castings for pressure purposes. Steel grades for use at room temperature and at elevated temperature
EN 10213-3:1996 Technical delivery conditions for steel castings for pressure purposes. Steels for use at low temperatures
EN 10213-4:1996 Technical delivery conditions for steel castings for pressure purposes. Austenitic and austenitic-ferritic steel grades
EN 10216-1:2002 Seamless steel tubes for pressure purposes. Technical delivery conditions
EN 10216-2:2002 Seamless steel tubes for pressure purposes. Technical delivery conditions. Non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10216-3:2002 Seamless steel tubes for pressure purposes. Technical delivery conditions. Alloy fine grain steel tubes
EN 10216-4:2002 Seamless steel tubes for pressure purposes. Technical delivery conditions
EN 10216-5:2004 Seamless steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes
EN 10217-1:2002 Welded steel tubes for pressure purposes. Technical delivery conditions. Non-alloy steel tubes with specified room temperature properties
EN 10217-2:2002 Welded steel tubes for pressure purposes. Technical delivery conditions. Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-3:2002 Welded steel tubes for pressure purposes. Technical delivery conditions. Alloy fine grain steel tubes
EN 10217-4:2002 Welded steel tubes for pressure purposes. Technical delivery conditions. Electric welded non-alloy steel tubes with specified low temperature properties
EN 10217-5:2002 Welded steel tubes for pressure purposes. Technical delivery conditions. Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
EN 10217-6:2002 Welded steel tubes for pressure purposes. Technical delivery conditions. Submerged arc welded non-alloy steel tubes with specified low temperature properties
EN 10217-7:2005 Welded steel tubes for pressure purposes. Technical delivery conditions. Stainless steel tubes
EN 10218-1:1994 Steel wire and wire products. General. Test methods
EN 10218-2:1997 Steel wire and wire products. General. Wire dimensions and tolerances
EN 10219-1:1997 Cold formed welded structural sections of non-alloy and fine grain steels. Technical delivery requirements
EN 10219-2:1997 Cold formed welded structural sections of non-alloy and fine grain steels. Tolerances, dimensions and sectional properties
EN 1022:1997 Domestic furniture. Seating. Determination of stability
EN 10220:2002 Seamless and welded steel tubes. Dimensions and masses per unit length
EN 10221:1996 Specification for surface quality classes for hot-rolled bars and rods. Technical delivery conditions
EN 10222-1:1998 Steel forgings for pressure purposes. General requirements for open die forgings
EN 10222-2:2000 Steel forgings for pressure purposes. Ferritic and martensitic steels with specified elevated temperature properties
EN 10222-3:1999 Steel forgings for pressure purposes. Nickel steels with specified low-temperature properties
EN 10222-4:1999 Steel forgings for pressure purposes. Weldable fine-grain steels with high proof strength
EN 10222-5:2000 Steel forgings for pressure purposes. Martensitic, austenitic and austenitic-ferritic stainless steels
EN 10223-1:1998 Steel wire and wire products for fences. Zinc and zinc alloy coated steel barbed wire
EN 10223-2:1998 Steel wire and wire products for fences. Hexagonal steel wire netting for agricultural, insulation and fencing purposes
EN 10223-3:1998 Steel wire and wire products for fences. Hexagonal steel wire netting for engineering purposes
EN 10223-4:1998 Steel wire and wire products for fences. Steel wire welded mesh fencing
EN 10223-5:1998 Steel wire and wire products for fences. Steel wire woven hinged joint and knotted mesh fencing
EN 10223-6:1998 Steel wire and wire products for fences. Steel wire chain link fencing
EN 10223-7:2002 Steel wire and wire products for fences. Steel wire welded panels. For fencing
EN 10224:2002 Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption. Technical delivery conditions
EN 10225:2001 Weldable structural steels for fixed offshore structures. Technical delivery conditions
EN 10226-1:2004 Pipe threads where pressure tight joins are made on the threads. Taper external threads and parallel internal threads. Dimensions, tolerances and designation
EN 10228-1:1999 Non-destructive testing of steel forgings. Magnetic particle inspection
EN 10228-2:1998 Non-destructive testing of steel forgings. Penetrant testing
EN 10228-3:1998 Non-destructive testing of steel forgings. Ultrasonic testing of ferritic or martensitic steel forgings
EN 10228-4:1999 Non-destructive testing of steel forgings. Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings
EN 10229:1998 Evaluation of resistance of steel products to hydrogen induced cracking (HIC)
EN 10230-1:2000 Steel wire nails. Loose nails for general applications
EN 1023-1:1997 Office furniture. Screens. Dimensions
EN 1023-2:2000 Office furniture. Screens. Mechanical safety requirements
EN 1023-3:2000 Office furniture. Screens. Test methods
EN 10238:1997 Automatically blast cleaned and automatically primed structural steel products
EN 1024:1997 Clay roofing tiles for discontinuous laying. Determination of geometric characteristics
EN 10240:1998 Internal and/or external protective coatings for steel tubes. Specification for hot dip galvanized coatings applied in automatic plants
EN 10241:2000 Steel threaded pipe fittings
EN 10242:1995 Threaded pipe fittings in malleable cast iron
EN 10243-1:1999 Steel die forgings. Tolerances on dimensions. Drop and vertical press forgings
EN 10243-2:1999 Steel die forgings. Tolerances on dimensions. Upset forgings made on horizontal forging machines
EN 10244-1:2001 Steel wire and wire products. Non-ferrous metallic coatings on steel wire. General principles
EN 10244-2:2001 Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Zinc or zinc alloy coatings
EN 10244-3:2001 Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Aluminium coatings
EN 10244-4:2001 Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Tin coatings
EN 10244-5:2001 Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Nickel coatings
EN 10244-6:2001 Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Copper, bronze or brass coatings
EN 10245-1:2001 Steel wire and wire products. Organic coatings on steel wire. General rules
EN 10245-2:2001 Steel wire and wire products. Organic coatings on steel wire. PVC finished wire
EN 10245-3:2001 Steel wire and wire products. Organic coatings on steel wire. PE coated wire
EN 10245-4:2003 Steel wire and wire products. Organic coatings on steel wire. Polyester coated wire
EN 10246-1:1996 Non-destructive testing of steel tubes. Automatic electromagnetic testing of seamless and welded
EN 10246-10:2000 Non-destructive testing of steel tubes. Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections
EN 10246-11:2000 Non-destructive testing of steel tubes. Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections
EN 10246-12:2000 Non-destructive testing of steel tubes. Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections
EN 12325-2:1999 Irrigation techniques. Centre pivot and moving lateral systems. Minimum performances and technical characteristics
EN 12325-3:1999 Irrigation techniques. Centre pivot and moving lateral systems. Terminology and classification
EN 12326-1:2004 Slate and stone products for discontinuous roofing and cladding. Product specification
EN 12326-2:2000 Slate and stone products for discontinuous roofing and cladding. Methods of test
EN 12327:2000 Gas supply systems. Pressure testing, commissioning and decommissioning procedures. Functional requirements
EN 12329:2000 Corrosion protection of metals. Electrodeposited coatings of zinc with supplementary treatment on iron or steel
EN 1233:1997 Water quality. Determination of chromium. Atomic absorption spectrometric methods
EN 12330:2000 Corrosion protection of metals. Electrodeposited coatings of cadmium on iron or steel
EN 123300:1992 Specification for harmonized system of quality assessment for electronic components. Sectional specification. Multilayer printed boards
EN 12332-1:1999 Rubber- or plastics-coated fabrics. Determination of bursting strength. Steel ball method
EN 12332-2:2002 Rubber- or plastics-coated fabrics. Determination of bursting strength. Hydraulic method
EN 12334:2001 Industrial valves. Cast iron check valves
EN 12337-1:2000 Glass in building. Chemically strengthened soda lime silicate glass. Definition and description
EN 12337-2:2004 Glass in building. Chemically strengthed soda lime silicate glass. Evaluation of conformity/Product standard
EN 12338:1998 Water quality. Determination of mercury. Enrichment methods by amalgamation
EN 12339:1997 Inland navigation vessels. Rope tubs
EN 123400:1992 Harmonized system of quality assessment for electronic components. Sectional specification: flexible printed boards without through connections
EN 123400-800:1992 Harmonized system of quality assessment for electronic components. Capability detail specification: flexible printed boards without through-connections
EN 12341:1999 Air quality. Determination of the PM10 fraction of suspended particulate matter. Reference method and field test procedure to demonstrate reference equivalence of measurement methods
EN 12342:1998 Breathing tubes intended for use with anaesthetic apparatus and ventilators
EN 12346:1999 Gymnastic equipment. Wall bars, lattice ladders and climbing frames. Safety requirements and test methods
EN 12347:1998 Biotechnology. Performance criteria for steam sterilizers and autoclaves
EN 12348:2000 Core drilling machines on a stand. Safety
EN 1235:1995 Solid fertilizers. Test sieving
EN 123500:1992 Specification for harmonized system of quality assessment for electronic components. Sectional specification: flexible printed boards with through connections
EN 123500-800:1992 Harmonized system of quality assessment for electronic components. Capability detail specification: flexible printed boards with through-connections
EN 12350-1:2000 Testing fresh concrete. Sampling
EN 12350-2:2000 Testing fresh concrete. Slump test
EN 12350-3:2000 Testing fresh concrete. Vebe test
EN 12350-4:2000 Testing fresh concrete. Degree of compactability
EN 12350-5:2000 Testing fresh concrete. Flow table test
EN 12350-6:2000 Testing fresh concrete. Density
EN 12350-7:2000 Testing fresh concrete. Air content. Pressure methods
EN 12351:1999 Industrial valves. Protective caps for valves with flanged connections
EN 12352:2000 Traffic control equipment. Warning and safety light devices
EN 12353:2000 Chemical disinfectants and antiseptics. Preservation of microbial strains used for the determination of bactericidal and fungicidal activity
EN 12354-1:2000 Building acoustics. Estimation of acoustic performance in buildings from the performance of elements. Airborne sound insulation between rooms
EN 12354-2:2000 Building acoustics. Estimation of acoustic performance in buildings from the performance of elements. Impact sound insulation between rooms
EN 12354-3:2000 Building acoustics. Estimation of acoustic performance in buildings from the performance of elements. Airborne sound insultation against outdoor sound
EN 12354-4:2000 Building acoustics. Estimation of acoustic performance in buildings from the performance of elements. Transmission of indoor sound to the outside
EN 12354-6:2003 Building acoustics. Estimation of acoustic performance of buildings from the performance of elements. Sound absorption in enclosed spaces
EN 12355:2003 Food processing machinery. Derinding-, skinning- and membrane removal machines. Safety and hygiene requirements
EN 1236:1995 Fertilizers. Determination of bulk density (loose)
EN 123600:1997 Harmonized system of quality assessment for electronic components. Sectional specification. Flex-rigid multilayer printed boards with through connections
EN 12365-1:2003 Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling. Performance requirements and classification
EN 12365-2:2003 Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling. Linear compression force test methods
EN 12365-3:2003 Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling. Deflection recovery test method
EN 12365-4:2003 Building hardware. Gasket and weatherstripping for doors, windows, shutters and curtain walling. Recovery after accelerated ageing test method
EN 12368:2000 Traffic control equipment. Signal heads
EN 12369-1:2001 Wood-based panels. Characteristic values for structural design. OSB, particleboards and fireboards
EN 12369-2:2004 Wood-based panels. Characteristic values for structural design. Plywood
EN 1237:1995 Fertilizers. Determination of bulk density (tapped)
EN 12370:1999 Natural stone test methods. Determination of resistance to salt crystallization
EN 123700:1997 Harmonized system of quality assessment for electronic components. Sectional specification. Flex-rigid double sided printed boards with through connections
EN 12371:2001 Natural stone test methods. Determination of frost resistance
EN 12372:1999 Natural stone test methods. Determination of flexural strength under concentrated load
EN 12373-1:2001 Aluminium and aluminium alloys. Anodizing. Method for specifying decorative and protective anodic oxidation coatings on aluminium
EN 12373-10:1999 Aluminium and aluminium alloys. Anodizing. Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus
EN 12373-11:2001 Aluminium and aluminium alloys. Anodizing. Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20$0D, 45$0D, 60$0D, and 85$0D
EN 12373-12:2001 Aluminium and aluminium alloys. Anodizing. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
EN 12373-13:2001 Aluminium and aluminium alloys. Anodizing. Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
EN 12373-14:2001 Aluminium and aluminium alloys. Anodizing. Visual determination of image clarity of anodic oxidation coatings. Chart scale method
EN 12373-15:2001 Aluminium and aluminium alloys. Anodizing. Assessment of resistance of anodic oxidation coatings to cracking by deformation
EN 12373-16:2001 Aluminium and aluminium alloys. Anodizing. Check for continuity of thin anodic oxidation coatings. Copper sulfate test
EN 12373-17:2001 Aluminium and aluminium alloys. Anodizing. Determination of electric breakdown potential
EN 12373-18:2001 Aluminium and aluminium alloys. Anodizing. Rating system for the evaluation of pitting corrosion. Chart method
EN 12373-19:2001 Aluminium and aluminium alloys. Anodizing. Rating system for the evaluation of pitting corrosion. Grid method
EN 12373-2:1999 Aluminium and aluminium alloys. Anodizing. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method
EN 12373-3:1999 Aluminium and aluminium alloys. Anodizing. Determination of thickness of anodic oxidation coatings. Non-destructive measurement by split-beam microscope
EN 12373-4:1999 Aluminium and aluminium alloys. Anodizing. Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment
EN 12373-5:1999 Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
EN 12373-6:1999 Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass
EN 12373-7:1999 Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion
EN 12373-8:1999 Aluminium and aluminium alloys. Anodizing. Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatings
EN 12373-9:1999 Aluminium and aluminium alloys. Anodizing. Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus
EN 12374:1998 Packaging. Flexible tubes. Terminology
EN 12375:1998 Packaging. Flexible aluminium tubes. Wall thickness determination method
EN 12376:1999 In vitro diagnostic medical devices. Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology
EN 12377:1999 Packaging. Flexible tubes. Test method for the airtightness of closures
EN 1238:1999 Adhesives. Determination of the softening point of thermoplastic adhesives (ring and ball)
EN 12380:2002 Air admittance valves for drainage systems. Requirements, test methods and evaluation of conformity
EN 123800:1997 Harmonized system of quality assessment for electronic components. Sectional specification. Flexible multilayer printed boards with through connections
EN 12381:2005 Health informatics. Time standards for healthcare specific problems
EN 12384:1999 Copper and copper alloys. Determination of spring bending limit on strip
EN 12385-1:2002 Steel wire ropes. Safety. General requirements
EN 12385-10:2003 Steel wire ropes. Safety. Spiral ropes for general applications
EN 12385-2:2002 Steel wire ropes. Safety. Definitions, designation and classification
EN 12385-3:2004 Steel wire ropes. Safety. Information for use and maintenance
EN 12385-4:2002 Steel wire ropes. Safety. Stranded ropes for general lifting applications
EN 12385-5:2002 Steel wire ropes. Safety. Stranded ropes for lifts
EN 12385-6:2004 Steel wire ropes. Safety. Stranded ropes for mine shafts
EN 12385-7:2002 Steel wire ropes. Safety. Locked coil ropes for mine shafts
EN 12385-8:2002 Steel wire ropes. Safety. Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons
EN 12385-9:2002 Steel wire ropes. Safety. Locked coil carrying ropes for cableway installations designed to carry persons
EN 12386:1999 Chemicals used for treatment of water intended for human consumption. Copper sulfate
EN 12387:2005 Footwear, leather and imitation leather goods manufacturing machines. Modular shoe repair equipment. Safety requirements
EN 1239:1998 Adhesives. Freeze-thaw stability
EN 12390-1:2000 Testing hardened concrete. Shape, dimensions and other requirements for specimens and moulds
EN 12390-2:2000 Testing hardened concrete. Making and curing specimens for strength tests
EN 12390-3:2002 Testing hardened concrete. Compressive strength of test specimens
EN 12390-4:2000 Testing hardened concrete. Compressive strength. Specification for testing machines
EN 12390-5:2000 Testing hardened concrete. Flexural strength of test specimens
EN 12390-6:2000 Testing hardened concrete. Tensile splitting strength of test specimens
EN 12390-7:2000 Testing hardened concrete. Density of hardened concrete
EN 12390-8:2000 Testing hardened concrete. Depth of penetration of water under pressure
EN 12391-1:2003 Chimneys. Execution standard for metal chimneys. Chimneys for non-roomsealed heating appliances
EN 12392:2000 Aluminium and aluminium alloys. Wrought products. Special requirements for products intended for the production of pressure equipment
EN 12393-1:1999 Non-fatty foods. Multiresidue methods for the gas chromatographic determination of pesticide residues. General considerations
EN 12393-2:1999 Non-fatty foods. Multiresidue methods for the gas chromatographic determination of pesticide residues. Methods for extraction and clean-up
EN 12393-3:1999 Non-fatty foods. Multiresidue methods for the gas chromatographic determination of pesticide residues. Determination and confirmatory tests
EN 12396-1:1999 Non-fatty foods. Determination of dithiocarbamate and thiuram disulfide residues. Spectrometric method
EN 12396-2:1999 Non-fatty foods. Determination of dithiocarbamate and thiuram disulfide residues. Gas chromatographic method
EN 12396-3:2000 Non-fatty foods. Determination of dithiocarbamate and thiuram disulfide residues. UV spectrometric xanthogenate method
EN 12397:2004 Safety requirements for Cableway installations designed to carry persons. Operation
EN 124:1994 Gully tops and manhole tops for vehicular and pedestrian areas. Design requirements, type testing, marking, quality control
EN 1240:1998 Adhesives. Determination of hydroxyl value and/or hydroxyl content
EN 12400:2002 Windows and pedestrian doors. Mechanical durability. Requirements and classification
EN 12402:1999 Lead and lead alloys. Methods of sampling for analysis
EN 12405-1:2005 Gas meters. Conversion devices. Volume conversion
EN 12406:1999 Swap bodies. Thermal swap bodies of class C. Dimensions and general requirements
EN 12407:2000 Natural stone test methods. Petrographic examination
EN 12408:2004 Safety requirements for cableways installations designed to carry person. Quality control
EN 12409:1999 Rubber and plastics machines. Thermoforming machines. Safety requirements
EN 1241:1998 Adhesives. Determination of acid value
EN 12410:1999 Swap bodies. Thermal swap bodies of class A. Dimensions and general requirements
EN 12412-2:2003 Thermal performance of windows, doors and shutters. Determination of thermal transmittance by hot box method. Frames
EN 12412-4:2003 Thermal performance of windows, doors and shutters. Determination of thermal transmittance by hot box method. Roller shutter boxes
EN 12413:1999 Safety requirements for bonded abrasive products
EN 12414:1999 Vehicle parking control equipment. Pay and display ticket machine. Technical and functional requirements
EN 12415:2001 Safety of machine tools. Small numerically controlled turning machines and turning centres
EN 12416-1:2001 Fixed firefighting systems. Powder systems. Requiremments and test methods for components
EN 12416-2:2001 Fixed firefighting systems. Powder systems. Design, construction and maintenance
EN 12417:2001 Machine tools. Safety. Machining centres
EN 12418:2000 Masonry and stone cutting-off machines for job site. Safety
EN 1242:1998 Adhesives. Determination of isocyanate content
EN 12420:1999 Copper and copper alloys. Forgings
EN 12421:1998 Magnesium and magnesium alloys. Unalloyed magnesium
EN 12422:1999 Sisal twines
EN 12423:1999 Polypropylene twines
EN 12424:2000 Industrial, commercial and garage doors and gates. Resistance to wind load. Classification
EN 12425:2000 Industrial, commercial and garage doors and gates. Resistance to water penetration. Classification
EN 12426:2000 Industrial, commercial and garage doors and gates. Air permeability. Classification
EN 12427:2000 Industrial, commercial and garage doors and gates. Air permeability. Test method
EN 12428:2000 Industrial, commercial and garage doors and gates. Thermal transmittance. Requirements for the calculation
EN 12429:1998 Thermal insulating products for building applications. Conditioning to moisture equilibrium under specified temperature and humidity conditions
EN 1243:1999 Adhesives. Determination of free formaldehyde in amino and amidoformaldehyde condensates
EN 12430:1998 Thermal insulating products for building applications. Determination of behaviour under point load
EN 12431:1998 Thermal insulating products for building applications. Determination of thickness for floating floor insulating products
EN 12432:1998 Gymnastic equipment. Balancing beams. Functional and safety requirements, test methods
EN 12433-1:2000 Industrial, commercial, and garage doors and gates. Terminology. Types of doors
EN 12433-2:2000 Industrial, commercial, and garage doors and gates. Terminology. Parts of doors
EN 12434:2000 Cryogenic vessels. Cryogenic flexible hoses
EN 12436:2002 Adhesives for load-bearing timber structures. Casein adhesives. Classification and performance requirements
EN 12438:1998 Magnesium and magnesium alloys. Magnesium alloys for cast anodes
EN 12439:1999 Sterile rectal catheters for single use
EN 1244:1998 Adhesives. Determination of the colour and/or colour changes of adhesive coats under the influence of light
EN 12440:2001 Natural stone. Denomination criteria
EN 12441-1:2002 Zinc and zinc alloys. Chemical analysis. Determination of aluminium in zinc alloys. Titrimetric method
EN 12441-10:2004 Zinc and zinc alloys. Chemical analysis. Determination of chromium and titanium in zinc alloys. Spectrophotometric method
EN 12441-2:2002 Zinc and zinc alloys. Chemical analysis. Determination of magnesium in zinc alloys. Flame atomic absorption spectrometric method
EN 12441-3:2002 Zinc and zinc alloys. Chemical analysis. Determination of lead, cadmium and copper. Flame atomic absorption spectometric method
EN 12441-4:2003 Zinc and zinc alloys. Chemical analysis. Determination of iron in zinc alloys. Spectrophotometric method
EN 12441-5:2003 Zinc and zinc alloys. Chemical analysis. Determination of iron in primary zinc. Spectrophotometric method
EN 12441-6:2003 Zinc and zinc alloys. Chemical analysis. Determination of aluminium and iron. Flame atomic absorption spectrometric method
EN 12441-7:2004 Zinc and zinc alloys. Chemical analysis. Determination of tin. Flame atomic absorption spectrometric method after extraction
EN 12441-8:2004 Zinc and zinc alloys. Chemical analysis. Detection of tin in secondary zinc. Flame atomic absorption spectrometric method
EN 12441-9:2004 Zinc and zinc alloys. Chemical analysis. Determination of nickel in zinc alloys. Flame atomic absorption spectrometric method
EN 12442-1:2000 Animal tissues and their derivatives utilized in the manufacture of medical devices. Analysis and management of risk
EN 12442-2:2000 Animal tissues and their derivatives utilized in the manufacture of medical devices. Controls on sourcing, collection and handling
EN 12442-3:2000 Animal tissues and their derivatives utilized in the manufacture of medical devices. Validation of the elimination and/or inactivation of viruses and transmissible agents
EN 12444:2001 Industrial, commercial and garage doors and gates. Resistance to wind load. Testing and calculation
EN 12445:2001 Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Test methods
EN 12446:2003 Chimneys. Components. Concrete outer wall elements
EN 12447:2001 Geotextiles and geotextile-related products. Screening test method for determining the resistance to hydrolysis in water
EN 12449:1999 Copper and copper alloys. Seamless, round tubes for general purposes
EN 1245:1999 Adhesives. Determination of pH. Test method
EN 12450:1999 Copper and copper alloys. Seamless, round copper capillary tubes
EN 12451:1999 Copper and copper alloys. Seamless, round tubes for heat exchangers
EN 12452:1999 Copper and copper alloys. Rolled, finned, seamless tubes for heat exchangers
EN 12453:2001 Industrial, commercial and garage doors and gates. Safety in use of power operated doors. Requirements
EN 12454:1998 Founding. Visual examination of surface discontinuities. Steel sand castings
EN 12455:1999 Resilient floor coverings. Specification for corkment underlay
EN 12457-1:2002 Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges.
EN 12457-2:2002 Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges.
EN 12457-3:2002 Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges.
EN 12457-4:2002 Characterisation of waste. Leaching. Compliance test for leaching of granular waste materials and sludges.
EN 12458:1999 Surface active agents. Determination of stability in hard water
EN 1246:1998 Adhesives. Determination of ash and sulfated ash
EN 12460:1998 Biotechnology. Large-scale process and production. Guidance on equipment selection and installation in accordance with the biological risk
EN 12461:1998 Biotechnology. Large-scale process and production. Guidance for the handling, inactivating and testing of waste
EN 12462:1998 Biotechnology. Performance criteria for pumps
EN 12463:2004 Food processing machinery. Filling machines and auxiliary machines. Safety and hygiene requirements
EN 12464-1:2002 Light and lighting. Lighting of work places. Indoor work places
EN 12465:2001 Wood poles for overhead lines. Durability requirements
EN 12466:1998 Resilient floor coverings. Vocabulary
EN 12467:2004 Fibre-cement flat sheets. Product specification and test methods
EN 12468:1998 Biotechnology. Modified organisms for application in the environment. Guidance for the monitoring strategies for deliberate releases of genetically modified plants
EN 12469:2000 Biotechnology. Performance criteria for microbiological safety cabinets
EN 1247:2004 Foundry machinery. Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi-continuous casting machines
EN 12470-1:2000 Clinical thermometers. Metallic liquid-in-glass thermometers with maximum device
EN 12470-2:2001 Clinical thermometers. Phase change type (dot matrix) thermometers
EN 12470-3:2000 Clinical thermometers. Performance of compact electrical thermometers (non-predictive and predictive) with maximum device
EN 12470-4:2001 Clinical thermometers. Performance of electrical thermometers for continuous measurement
EN 12470-5:2003 Clinical thermometers. Performance of infra-red ear thermometers (with maximum device)
EN 12472:1999 Method for the simulation of wear and corrosion for the detection of nickel release from coated items
EN 12473:2000 General principles of cathodic protection in sea water
EN 12474:2001 Cathodic protection for submarine pipelines
EN 12475-1:1998 Classification of dense shaped refractory products. Alumina-silica products
EN 12475-2:1998 Classification of dense shaped refractory products. Basic products containing less than 7% residual carbon
EN 12475-3:1998 Classification of dense shaped refractory products. Basic products containing from 7% to 30% residual carbon
EN 12475-4:1999 Classification of dense shaped refractory products. Special products
EN 12476:2000 Phosphate conversion coatings of metals. Method of specifying requirements
EN 12477:2001 Protective gloves for welders
EN 12478:2001 Safety of machine tools. Large numerically controlled turning machines and turning centres
EN 12479:2002 Wood poles for overhead lines. Sizes. Methods of measurement and permissible deviations
EN 1248:2001 Foundry machinery. Safety requirements for abrasive blasting equipment
EN 12480:2002 Gas meters. Rotary displacement gas meters
EN 12481:2001 Self adhesive tapes. Terminology
EN 12482-1:1998 Aluminium and aluminium alloys. Reroll stock for general applications. Specifications for hot rolled reroll stock
EN 12482-2:1998 Aluminium and aluminium alloys. Reroll stock for general applications. Specifications for cold rolled reroll stock
EN 12483:1999 Liquid pumps. Pump units with frequency inverters. Guarantee and compatibility tests
EN 12484-1:1999 Irrigation techniques. Automatic turf irrigation systems. Definition of the programme of equipment by the owner
EN 12484-2:2000 Irrigation techniques. Automatic turf irrigation systems. Design and definition of typical technical templates
EN 12484-3:2000 Irrigation techniques. Automatic turf irrigation systems. Automatic control and system management
EN 12484-4:2002 Irrigation techniques. Automatic turf irrigation systems. Installation and acceptance
EN 12484-5:2002 Irrigation techniques. Automatic turf irrigation systems. Testing methods of systems
EN 12485:2001 Chemicals used for treatment of water intended for human consumption. Calcium carbonate, high-calcium lime and half-burnt dolomite. Test methods
EN 12487:2000 Corrosion protection of metals. rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
EN 12489:2000 Industrial, commercial and garage doors and gates. Resistance to water penetration. Test method
EN 12490:1999 Durability of wood and wood-based products. Preservative-treated solid wood. Determination of the penetration and retention of creosote in treated wood
EN 12491:2001 Paragliding equipment. Emergency parachutes. Safety requirements and test methods
EN 12492:2000 Mountaineering equipment. Helmets for mountaineers. Safety requirements and test methods
EN 12493:2001 Welded steel tanks for liquefied petroleum gas (LPG). Road tankers. Design and manufacture
EN 12495:2000 Cathodic protection for fixed steel offshore structures
EN 12499:2003 Internal cathodic protection of metallic structures
EN 125:1991 Specification for flame supervision devices for gas-burning appliances. Thermo-electric types
EN 12500:2000 Protection of metallic materials against corrosion. Corrosion likelihood in atmospheric environment. Classification, determination and estimation of corrosivity of atmospheric environments
EN 125000:1998 Harmonized system of quality assessment for electronic components. Generic specification: cores made of ferrite materials
EN 12501-1:2003 Protection of metallic materials against corrosion. Corrosion likelihood in soil. General
EN 12501-2:2003 Protection of metallic materials against corrosion. Corrosion likelihood in soil. Low alloyed and non alloyed ferrous materials
EN 12502-1:2004 Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems. General
EN 12502-2:2004 Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems.
EN 12502-3:2004 Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems.
EN 12502-4:2004 Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems. Influencing factors for stainless steels
EN 12502-5:2004 Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in water distribution and storage systems.
EN 12503-1:2001 Sports mats. Gymnastic mats, safety requirements
EN 12503-2:2001 Sports mats. Pole vault and high jump mats, safety requirements
EN 12503-3:2001 Sports mats. Judo mats, safety requirements
EN 12503-4:2001 Sports mats. Determination of shock absorption
EN 12503-5:2001 Sports mats. Determination of the base friction
EN 12503-6:2001 Sports mats. Determination of the top friction
EN 12503-7:2001 Sports mats. Determination of static stiffness
EN 12504-1:2000 Testing concrete in structures. Cored specimens. Taking, examining and testing in compression
EN 12504-2:2001 Testing concrete in structures. Non-destructive testing. Determination of rebound number
EN 12504-3:2005 Testing concrete in structures. Determination of pull-out force
EN 12504-4:2004 Testing concrete. Determination of ultrasonic pulse velocity
EN 12505:2000 Food processing machinery. Centrifugal machines for processing edible oils and fats. Safety and hygiene requirements
EN 12506:2003 Characterization of waste. Analysis of eluates. Determination of pH, As, Ba, Cd, Cl$u-, Co, Cr, Cr VI, Cu, Mo, Ni, NO$d2$u-, Pb, total S, SO$d4$u2$u-, V and Zn
EN 12507:2000 Transportation services. Guidance notes on the application of EN ISO 9002 to the road transport, storage and distribution industries
EN 12508:2000 Corrosion protection of metals and alloys. Surface treatment, metallic and other inorganic coatings. Vocabulary
EN 12509:2001 Timber poles for overhead lines. Test methods. Determination of modulus of elasticity, bending strength, density and moisture content
EN 12510:2002 Wood poles for overhead lines. Strength grading criteria
EN 125100:1993 Harmonized system of quality assessment for electronic components: sectional specification: magnetic oxide cores for inductor applications
EN 1251-1:2000 Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1000 litres volume. Fundamental requirements
EN 12511:2002 Wood poles for overhead lines. Determination of characteristic values
EN 1251-2:2000 Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1000 litres volume. Design, fabrication, inspection and testing
EN 12512:2001 Timber structures. Test methods. Cyclic testing of joints made with mechanical fasteners
EN 12513:2000 Founding. Abrasion resistant cast irons
EN 1251-3:2000 Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1000 litres volume. Operational requirements
EN 12514-1:2000 Installations for oil supply systems for oil burners. Safety requirements and tests. Parts, oil feed pumps, control and safety devices, supply tanks
EN 12514-2:2000 Installations for oil supply systems for oil burners. Safety requirements and tests. Parts, valves, pipes, filters, oil de-aerators, meters
EN 12516-1:2005 Industrial valves. Shell design strength. Tabulation method for steel valve shells
EN 12516-2:2004 Industrial vales. Shell design strength. Calculation method for steel valve shells
EN 12516-3:2002 Valves. Shell design strength. Experimental method
EN 12517:1998 Non-destructive testing of welds. Radiographic testing of welded joints. Acceptance levels
EN 12518:2000 Chemicals used for treatment of water intended for human consumption. High-calcium lime
EN 12519:2004 Windows and pedestrian doors. Terminology
EN 125200:1993 Harmonized system of quality assessment for electronic components: sectional specification: magnetic oxide cores for linear transformers
EN 1252-1:1998 Cryogenic vessels. Materials. Toughness requirements for temperatures below $-80$0DC
EN 1252-2:2001 Cryogenic vessels. Materials. Toughness requirements for temperatures between $-80$0DC and $-20$0DC
EN 12522-1:1998 Furniture removal activities. Furniture removal for private individuals. Service specification
EN 12522-2:1998 Furniture removal activities. Furniture removal for private individuals. Provision of service
EN 12523:1999 External limb prostheses and external orthoses. Requirements and test methods
EN 12524:2000 Building materials and products. Hygrothermal properties. Tabulated design values
EN 12525:2000 Agricultural machinery. Front loaders. Safety
EN 12526:1999 Castors and wheels. Vocabulary, recommended symbols and multilingual dictionary
EN 12527:1999 Castors and wheels. Test methods and apparatus
EN 12528:1999 Castors and wheels. Castors for furniture. Requirements
EN 12529:1999 Castors and wheels. Castors for furniture. Castors for swivel chairs. Requirements
EN 12530:1999 Castors and wheels. Castors and wheels for manually propelled institutional applications
EN 12531:1999 Castors and wheels. Hospital bed castors
EN 1253-1:2003 Gullies for buildings. Requirements
EN 12532:1999 Castors and wheels. Castors and wheels for applications up to 1,1 m/s (4 km/h)
EN 1253-2:2003 Gullies for buildings. Test methods
EN 12533:1999 Castors and wheels. Castors and wheels for applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h)
EN 1253-3:1999 Gullies for buildings. Quality control
EN 12534:1999 Welding consumables. Wire electrodes, wires, rods and deposits for gas shielded metal arc welding of high strength steels. Classification
EN 1253-4:2000 Gullies for buildings. Access covers
EN 12535:2000 Welding consumables. Tubular cored electrodes for gas shielded metal arc welding of high strength steels. Classification
EN 1253-5:2003 Gullies for buildings. Gullies with light liquids closure
EN 12536:2000 Welding consumables. Rods for gas welding of non alloy and creep-resisting steels. Classification
EN 12540:2000 Corrosion protection of metals. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium
EN 125400:1993 Harmonized system of quality assessment for electronic components: sectional specification: adjusters used with magnetic oxide cores for use in inductors and tuned transformers
EN 125401:1997 Harmonized system of quality assessment for electronic components. Blank detail specification.
EN 1254-1:1998 Copper and copper alloys. Plumbing fittings. Fittings with ends for capillary soldering or capillary brazing to copper tubes
EN 12541:2002 Sanitary tapware. Pressure flushing valves and automatic closing urinal valves PN 10
EN 1254-2:1998 Copper and copper alloys. Plumbing fittings. Fittings with compression ends for use with copper tubes
EN 12542:2002 Static welded cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m$u3 and for installation above ground.
EN 1254-3:1998 Copper and copper alloys. Plumbing fittings. Fittings with compression ends for use with plastics pipes
EN 12543-1:1999 Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Scanning method
EN 12543-2:1999 Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Pinhole camera radiographic method
EN 12543-3:1999 Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Slit camera radiographic method
EN 12543-4:1999 Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Edge method
EN 12543-5:1999 Non-destructive testing. Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing. Measurement of the effective focal spot size
EN 1254-4:1998 Copper and copper alloys. Plumbing fittings. Fittings combining other end connections with capillary or compression ends
EN 12544-1:1999 Non-destructive testing. Measurement and evaluation of the X-ray tube voltage. Voltage divider method
EN 12544-2:2000 Non-destructive testing. Measurement and evaluation of the X-ray tube voltage. Constancy check by the thick filter method
EN 12544-3:1999 Non-destructive testing. Measurement and evaluation of the X-ray tube voltage. Spectrometric method
EN 1254-5:1998 Copper and copper alloys. Plumbing fittings. Fittings with short ends for capillary brazing to copper tubes
EN 12545:2000 Footwear, leather and imitation leather goods manufacturing machines. Noise test code. Common requirements
EN 12546-1:2000 Materials and articles in contact with foodstuffs. Insulated containers for domestic use. Specification for vacuum ware, insulated flasks and jugs
EN 12546-2:2000 Materials and articles in contact with foodstuffs. Insulated containers for domestic use. Specification for insulated bags and boxes
EN 12546-3:2000 Materials and articles in contact with foodstuffs. Insulated containers for domestic use. Specification for thermal packs
EN 12547:1999 Centrifuges. Common safety requirements
EN 12548:1999 Lead and alloys. Lead alloy ingots for electric cable sheathing and for sleeves
EN 12549:1999 Acoustics. Noise test code for fastener driving tools. Engineering method
EN 1255:1996 Inland navigation vessels. Swing derricks
EN 125500:1996 Harmonized system of quality assessment for electronic components. Sectional specification
EN 1256:1996 Gas welding equipment. Specification for hose assemblies for equipment for welding, cutting and allied processes
EN 12560-1:2001 Flanges and their joints. Gaskets for Class-designated flanges. Non-metallic flat gaskets with or without inserts
EN 12560-2:2001 Flanges and their joints. Gaskets for Class-designated flanges. Spiral wound gaskets for use with steel flanges
EN 12560-3:2001 Flanges and their joints. Gaskets for Class-designated flanges. Non-metallic PTFE envelope gaskets
EN 12560-4:2001 Flanges and their joints. Gaskets for Class-designated flanges. Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges
EN 12560-5:2001 Flanges and their joints. Gaskets for Class-designated flanges. Metallic ring joint gaskets for use with steel flanges
EN 12560-6:2003 Flanges and their joints. Gaskets for class-designated flanges. Covered serrated metal gaskets for use with steel flanges
EN 12560-7:2004 Flanges and their joints. Gaskets for class-designated flanges. Covered metal jacketed gaskets for use with steel flanges
EN 12561-1:1999 Railway applications. Tank wagons. Marking of tank wagons for the carriage of dangerous goods
EN 12561-2:2002 Railway applications. Tank wagons. Bottom emptying devices for liquid products including vapour return
EN 12561-3:2002 Railway applications. Tank wagons. Bottom filling and emptying devices for gases liquefied under pressure
EN 12561-4:2002 Railway applications. Tank wagons. Top devices for top emptying and filling of liquid products
EN 12561-5:2002 Railway applications. Tank wagons. Top devices for bottom emptying and top filling of liquid products
EN 12561-6:2002 Railway applications. Tank wagons. Manholes
EN 12561-7:2004 Railway applications. Tank wagons. Platforms and ladders
EN 12561-8:2004 Railway applications. Tank wagons. Heating connections
EN 12562:1999 Textiles. Para-aramid multifilament yarns. Test methods
EN 12563:1999 Non-active surgical implants. Joint replacement implants. Specific requirements for hip joint replacement implants
EN 12564:1999 Non-active surgical implants. Joint replacement implants. Specific requirements for knee joint replacement implants
EN 12566-1:2000 Small wastewater treatment systems for up to 50 PT. Prefabricated septic tanks
EN 12567:2000 Industrial valves. Isolating valves for LNG. Specification for suitability and appropriate verification tests
EN 12568:1998 Foot and leg protectors. Requirements and test methods for toecaps and metal penetration resistant inserts
EN 12569:1999 Industrial valves. Valves for chemical and petrochemical process industry. Requirements and tests
EN 12570:2000 Industrial valves. Method for sizing the operating element
EN 12571:1999 Materials and articles in contact with foodstuffs. Transport units for catering containers containing prepared foodstuffs. Thermal and hygienic requirements and testing
EN 12572:1999 Artificial climbing structures. Protection points, stability requirements and test methods
EN 12573-1:2000 Welded static non-pressurized thermoplastic tanks. General principles
EN 12573-2:2000 Welded static non-pressurized thermoplastic tanks. Calculation of vertical cylindrical tanks
EN 12573-3:2000 Welded static non-pressurized thermoplastic tanks. Design and calculation for single skin rectangular tanks
EN 12573-4:2000 Welded static non-pressurized thermoplastic tanks. Design and calculation of flanged joints
EN 12574-1:2002 Stationary waste containers. Containers with a capacity from 1700 l to 5000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting devices. Dimensions and design
EN 12574-2:2002 Stationary waste containers. Performance requirements and test methods
EN 12574-3:2002 Stationary waste containers. Safety and health requirements
EN 12575:1998 Plastics. Thermoset moulding compounds. Determination of the degree of fibre wet out in SMC
EN 12576:1998 Plastics. Fibre reinforced composites. Preparation of compression moulded test plates of SMC, BMC and DMC
EN 12579:2000 Soil improvers and growing media. Sampling
EN 12580:2000 Soil improvers and growing media. Determination of a quantity
EN 12582:1999 Surface active agents. Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD
EN 12583:2000 Gas supply systems. Compressor stations. Functional requirements
EN 12584:1999 Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts. Terminology
EN 12585:1999 Glass plant, pipeline and fittings. Pipeline and fittings DN 15 to 1000. Compatibility and interchangeability
EN 12586:1999 Child care articles. Soother holder. Safety requirements and test methods
EN 12588:1999 Lead and lead alloys. Rolled lead sheet for building purposes
EN 12589:2001 Ventilation for buildings. Air terminal units. Aerodynamic testing and rating of constant and variable rate terminal units
EN 12590:2000 Textiles. Industrial sewing threads made wholly or partly form synthetic fibres
EN 12591:2000 Bitumen and bituminous binders. Specifications for paving grade bitumens
EN 12592:2000 Methods of test for petroleum and its products. BS 2000-47. Bitumen and bituminous binders. Determination of solubility
EN 12593:2000 Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the Fraass breaking point
EN 12594:2000 Methods of test for petroleum and its products. Bitumen and bituminous binders. Preparation of test samples
EN 12595:2000 Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of kinematic viscosity
EN 12596:2000 Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of dynamic viscosity by vacuum capillary
EN 12597:2000 Bitumen and bituminous binders. Terminology
EN 12599:2000 Ventilation for buildings. Tests procedures and measuring methods for handing over installed ventilation and air conditioning systems
EN 126:2004 Multifunctional controls for gas burning appliances
EN 12600:2002 Glass in building. Pendulum test. Impact test method and classification for flat glass
EN 12601:2001 Reciprocating internal combustion engine driven generating sets. Safety
EN 12603:2002 Glass in building. Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data
EN 12604:2000 Industrial, commercial and garage doors and gates. Mechanical aspects. Requirements
EN 12605:2000 Industrial, commercial and garage doors and gates. Mechanical aspects. Test methods
EN 12606-1:2000 Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the paraffin wax content. Method by distillation
EN 12606-2:2000 Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the paraffin wax content. Method by extraction
EN 12607-1:2000 Methods of test for petroleum and its products. Bitumen and bitumenous binders. Determination of the resistance to hardening under the influence of heat and air. RTFOT method
EN 12607-2:2000 Methods of test for petroleum and its products. Bitumen and bitumenous binders. Determination of the resistance to hardening under the influence of heat and air. TFOT Method
EN 12607-3:2000 Methods of test for petroleum and its products. Bitumen and bitumenous binders. Determination of the resistance to hardening under the influence of heat and air. RFT Method
EN 12608:2003 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Classification, requirements and test methods
EN 1261:1995 Fibre ropes for general service. Hemp
EN 12613:2001 Plastic warning devices for underground cables and pipelines with visual characteristics
EN 12614:2004 Products and systems for the protection and repair of concrete structures. Test methods. Determination of glass transition temperatures of polymers
EN 12615:1999 Products and systems for the protection and repair of concrete structures. Test methods. Determination of slant shear strength
EN 12616:2003 Surfaces for sports areas. Determination of water infiltration rate
EN 12617-1:2003 Products and systems for the protection and repair of concrete structures. Test methods. Determination of linear shrinkage for polymers and surface protection systems (SPS)
EN 12617-3:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of early age linear shrinkage for structural bonding agents
EN 12617-4:2002 Products and systems for the protection and repair of concrete structures. Test methods. Determination of shrinkage and expansion
EN 12618-1:2003 Products and systems for the protection and repair of concrete structures. Test methods. Adhesion and elongation capacity of injection products with limited ductility
EN 12618-3:2004 Products and systems for the protection and repair of concrete structures. Test methods. Determination of the adhesion of injection products, with or without thermal cycling.
EN 12619:1999 Stationary source emissions. Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases. Continuous flame ionization detector method
EN 1262:2003 Surface active agents. Determination of pH value of solutions or dispersions
EN 12620:2002 Aggregates for concrete
EN 12622:2001 Safety of machine tools. Hydraulic press brakes
EN 12625-3:1999 Tissue paper and tissue products. Determination of thickness, bulking thickness and apparent bulk density
EN 12625-4:1999 Tissue paper and tissue products. Determination of tensile strength, stretch at break and tensile energy absorption
EN 12625-5:1999 Tissue paper and tissue products. Determination of wet tensile strength
EN 12625-7:2000 Tissue paper and tissue products. Determination of optical properties
EN 12627:1999 Industrial valves. Butt welding ends for steel valves
EN 12628:1999 Diving accessories. Combined buoyancy and rescue devices. Functional and safety requirements, test methods
EN 12629-1:2001 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Common requirements
EN 12629-2:2002 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Block making machines
EN 12629-3:2002 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Slide and turntable machines
EN 12629-4:2001 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Concrete and tile making machines
EN 12629-5.4:2003 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Concrete pipe coating machines
EN 12629-5-1:2003 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Pipe making machines manufacturing in the vertical axis
EN 12629-5-2:2003 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Pipe making machines manufacturing in the horizontal axis
EN 12629-5-3:2003 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Pipe prestressing machines
EN 12629-7:2004 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Stationary and mobile equipment for long line manufacture of prestressed products
EN 12629-8:2002 Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety.
EN 12630:1999 Fruit and vegetable juices. Determination of glucose, fructose, sorbitol and sucrose contents. Method using high-performance liquid chromatography
EN 12631:1999 Fruit and vegetable juices. Enzymatic determination of D- and L-lactic acid (lactate) content. NAD spectrometric method
EN 1263-1:2002 Safety nets. Safety requirements, test methods
EN 12632:1999 Fruit and vegetable juices. Enzymatic determination of acetic acid (acetate) content. NAD spectrometric method
EN 1263-2:2002 Safety nets. Safety requirements for the positioning limits
EN 12634:1998 Petroleum products and lubricants. Determination of acid number. Non-aqueous potentiometric titration method
EN 12635:2002 Industrial, commercial and garage doors and gates. Installation and use
EN 12636:1999 Products and systems for the protection and repair of concrete structures. Test methods. Determination of adhesion concrete to concrete
EN 12637-1:2004 Products and systems for the protection and repair of concrete structures. Test methods. Compatibility of injection products. Compatibility with concrete
EN 12637-3:2003 Products and systems for the protection and repair of concrete structures. Test methods. Compatibility of injection products. Effect of injection products on elastomers
EN 12639:2000 Liquid pumps and pump units. Noise test code. Grade 2 and grade 3 of accuracy
EN 12640:2001 Securing of cargo on road vehicles. Lashing points on commercial vehicles for goods transportation. Minimum requirements and testing
EN 1264-1:1998 Floor heating. Systems and components. Definitions and symbols
EN 12641-1:2000 Swap bodies. Tarpaulins. Minimum requirements
EN 1264-2:1998 Floor heating. Systems and components. Determination of the thermal output
EN 12642:2001 Securing of cargo on road vehicles. Body structure of commercial vehicles. Minimum requirements
EN 12643:1998 Earth-moving machinery. Rubber-tyred machines. Steering requirements
EN 1264-3:1998 Floor heating. Systems and components. Floor heating. Systems and components. Dimensioning
EN 1264-4:2001 Floor heating. Systems and components. Installation
EN 12644-1:2001 Cranes. Information for use and testing. Instructions
EN 12644-2:2000 Cranes. Information for use and testing. Marking
EN 12645:1999 Pressure gauges. Apparatus for inspection of pressure and/or inflation of tyres for motor vehicles. Metrology, requirements and testing
EN 1265:1999 Noise test code for foundry machines and equipment
EN 12653:2000 Footwear, leather and imitation leather manufacturing machines. Nailing machines. Safety requirements
EN 12654-1:1999 Textile glass. Yarns. Designation
EN 12654-2:1999 Textile glass. Yarns. Methods of test and general specifications
EN 12654-3:1999 Textile glass. Yarns. General requirements for general applications
EN 12655:1998 Gymnastic equipment. Hanging rings. Functional and safety requirements, test methods
EN 12659:1999 Lead and lead alloys. Lead
EN 1266:2002 Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases
EN 12662:1998 Methods of test for petroleum and its products. Liquid petroleum products. Determination of contamination in middle distillates
EN 12663:2000 Railway applications. Structural requirements of railway vehicle bodies
EN 12664:2001 Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods.
EN 12665:2002 Light and lighting. Basic terms and criteria for specifying lighting requirements
EN 12667:2001 Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods.
EN 12668-1:2000 Non-destructive testing. Characterization and verification of ultrasonic examination equipment. Instruments
EN 12668-2:2001 Non-destructive testing. Characterization and verification of ultrasonic examination equipment. Probes
   
Product Image











Related Products
GOST 11036-75, GOST 2590-88 Hot Rolled Round, Rod, Bar
GOST 11036-75, GOST 2590-88 Hot Rolled Round, Rod, Bar
GOST 11036-75, GOST 7417-75 Calibrated Cold Drawn Round, Rod, Bar
GOST 11036-75, GOST 7417-75 Calibrated Cold Drawn Round, Rod, Bar
High Purity Electrolytic Iron Flakes
High Purity Electrolytic Iron Flakes
Manufacture of IS-1030 Carbon Steel Castings Bars, Plates, Blocks, Tubes
Manufacture of IS-1030 Carbon Steel Castings Bars, Plates, Blocks, Tubes

Home  |  Company Profile  |  E-Mail Address  |  Product Catalog  |  Pipe/Tube  |  Hollow Section  |  Fitting/Flange  |  Sheet/Plate/Coil  |  Hot Rolled Steel Plate  |  Hot Rolled Steel Sheet  |  Hot Rolled Coil  |  Rod/Bar/Wire Rod  |  Bars For Oil & Gas  |  Forged Round Bar  |  Hexagonal Bar  |  Square Bar  |  Cold Drawn Bar  |  Forged Block/Circle  |  Structural Steel  |  Flat Bar/Strip  |  Stud/Bolt/Nut  |  Threaded Bar/Rod  |  Fastener  |  SA193 B7 Stud Bolt  |  SA193 B16 Stud Bolt  |  SA194 2H HEX NUT  |  Corten-A/Corten-B  |  SAILCOR IRSM41-97  |  Spring Steel Bar  |  Boiler/PVQ Plate  |  Structural Plate  |  Alloy Steel Plate  |  Ship Building Plate  |  LR Grade A/B Plate  |  ABS Grade A/B Plate  |  DNV Grade A/B Plate  |  BV Grade-A/B Plate  |  SABS 1431:1987 Steel  |  Q&T Steel Plate  |  Plates Size & Grade  |  SA516 60/70 HIC Plate  |  ASTM A516-60/70 Plate  |  ASTM A515-60/70 Plate  |  ST 52-3 DIN 17100  |  S355J2G3 EN 10025-2  |  S355K2G3 EN 10025-2  |  S355J2+N EN 10025-2  |  S355K2+N EN 10025-2  |  EN10025-2 Plate  |  EN10028-2/3 Plate  |  Abrasion Resistant Steel  |  Wear Resistant Steel  |  Hardox 400/450 Plate  |  Hardox 500/600 Plate  |  Weldox 700 Plate  |  SAILMA-350/350HI Plate  |  SAILMA-410/410HI Plate  |  SAILMA-450/450HI Plate  |  Seamless Pipe/Tube  |  Welded Pipe/Tube  |  ERW/EFW Pipe/Tube  |  SAW/HFW Pipe  |  ASME SA234/ASTM A234  |  ASME SA403/ASTM A403  |  ASME SA420/ASTM A420  |  ASME SA860/ASTM A860  |  Long Radius Bend  |  Hot Induction Bend  |  Forged Fitting  |  Forged Flange  |  API-5L Line Pipe  |  API-5L Gr.B PSL-1/2 Pipe  |  API-5L X-42 PSL-1/2 Pipe  |  API-5L X-46 PSL-1/2 Pipe  |  API-5L X-52 PSL-1/2 Pipe  |  API-5L X-56 PSL-1/2 Pipe  |  API-5L X-60 PSL-1/2 Pipe  |  API-5L X-65 PSL-1/2 Pipe  |  API-5L X-70 PSL-1/2 Pipe  |  High Speed Steel  |  Cold Work Tool Steel  |  Hot Work Tool Steel  |  Plastic Moulding Steel  |  BS 970 Specification  |  SAE Specification  |  JIS Specification  |  ASTM Standard Spec  |  ASME Standard Spec  |  Aerospace Alloy Spec  |  Equivalent Grade  |  Equivalent Grade  |  Equivalent Standard  |  Equivalent Standard  |  Technical Specification  |  DIN Material No.  |  Mechanical Properties  |  Mechanical Properties  |  Chemical Composition  |  Density  |  Contact Us  |  E-Mail Address  |  Links  |  News  |  Sitemap  |  Mobile Version
Powered by DIYTrade.com