SA516 Grade 60/70 Low Sulphur 0.003% max Boiler Steel Plate
ASTM A516/516M / ASME SA516/516M GRADE 60 / 65 / 70 HIC-Hydrogen Induced Cracking Tested NACE TM0284-2003 / NACE MR0175 / ISO 15156-2, SSCC-Sulphide Stress Corrosion Cracking Tested NACE TM0177-2005 / NACE MR0103-2007, SOHIC-Stress Oriented Hydrogen Induced Cracking Tested FINE GRAIN PRESSURE VESSEL STEEL PLATE FOR SOUR GAS SERVICE
Hot Rolled Steel ASTM/ASME A/SA 516 Grade 60/70 HIC Tested Plates in accordance with NACE Test Method TM0284 Latest Edition using a test solution A pH of 3 conforming to NACE TM0177 Latest Edition
CLR : Crack Length Ratio < 5% / < 10% / < 15%
CTR : Crack Thickness Ratio < 1.5% / < 3% / < 1%
CSR : Crack Sensitivity Ratio < 0.5% / < 1% / < 2%
Test Solution B with pH of 5
CLR : Crack Length Ratio < 0.5%
CTR : Crack Thickness Ratio < 0.1%
CSR : Crack Sensitivity Ratio < 0.05%
ASME SA516/SA516M-07 MT LTV ZT Grade 60/65/70
ASTM A516/A516M-07 MT LTV ZT Grade 60/65/70
ASME Section II Part A Edition 2007 Addenda 2008
ASME SA20/SA20M-08
ASTM A20/A20M-08
ASME SA770/SA770M-04
ASTM E290-97a
NACE MR-0175 / ISO 15156
Low Sulphur 0.003% max. with Supplementary Requirement of S1, S2, S3, S4, S5, S6, S7, S8, S9, S11, S12, S14, S17 acc. to ASME SA20/SA20M
Condition : Fully Killed, Normalized, Stress-Relieved (PWHT) Post Weld Heat Treatment
Steel Making Process : Open Hearth Furnace / Basic Oxygen Furnace (BOF), Ladle Refining Furnace (LRF), Vacuum Degassed (VD)
Vacuum Treated, Fully Deoxidised, Desulpherised, Dephosphorised
Charpy V-notch Impact Tested
Size tolerance as per EN 10029:1991
Positive thickness tolerance as per EN 10029:1991 Table 1, Class A
Flatness Tolerance as per Table 4, Class N, Category L of EN 10029-1991
Surface Quality as per EN 10163:1991 Part 2, Class A, Subclass-3
Edges : Trimmed / Mill Edge
Ultrasonic as per ASTM A578/578M Level A / Level B
Grain size No.6-8 or finer acc. to ASTM E112-96
Mill certificate acc. to EN 10204 3.1 / EN 10204 3.2 with IBR Form IV
We mainly stock the Plates of following make :
Salzgitter Mannesmann - Germany
ThyssenKrupp Steel - Germany
ThyssenKrupp Stahl - Germany
Dillinger Hutte - Germany
Rautaruukki - Finland
Voestalphine Grobblech - Austria
ISD HUTA - Poland
Corus - U.K
InduSteel - France
InduSteel - Belgium
SSAB - Sweden
Sumitomo Metals - Japan
Kobe Steel - Japan
JFE Steel - Japan
Japan Steel - Japan
Nippon Steel - Japan
Certificate & Inspection : c/w Calibration Works Certificate EN10204 3.1/DIN 50049 3.1/ISO 10474 Mill Test Report, NACE MR-01-03/NACE MR-01-75/ISO-15156, CE Marked, European Pressure Equipment Directive PED 97/23/EC, AD 2000-WO, ASME Boiler & Pressure Vessel Code Section-II Part-A Edition 2008, API 6A, with 3.2 certificate duly certified & approved by LRS-Lloyd's Register, GL-Germanischer Lloyd, BV-Bureau Veritas, DNV-Det Norske Veritas, ABS-American Bureau of Shipping, SGS, TUV, RINA, IRS, NORSOK APPROVED STANDARD M630, M650 Rev.3
Regards,
CONTACT PERSON :
MUKESH SHAH
Director
Mobile No. 0091- 9820292499
Email : rolexmetal@vsnl.net
ROLEX MATERIALS CORPORATION
( A METAL & STEEL Company )
57-A, KHATARGALLI,
THAKURDWAR,
MUMBAI - 400002, INDIA.
TEL.No. 0091-22-23858802
TEL.No. 0091-22-23823963
FAX No. 0091-22-23898724
Email : rolexmetal@vsnl.net
Website : www.rolexmaterials.com
CHAIRMAN - chairman@rolexmaterials.com
MANAGING DIRECTOR - managingdirector@rolexmaterials.com
TECHNICAL DIRECTOR - technicaldirector@rolexmaterials.com
SALES INTERNATIONAL - salesinternational@rolexmaterials.com
SALES DOMESTIC - salesdomestic@rolexmaterials.com
GENERAL INFORMATION - info@rolexmaterials.com
SALES GENERAL - sales@rolexmaterials.com
SERVICE - service@rolexmaterials.com
RECRUITMENT - career@rolexmaterials.com
WEBMASTER - webmaster@rolexmaterials.com
PLATE / SHEET / COIL / FLAT BAR
Plates Sheets 1 mm to 300 mm thickness - Cold Rolled, Hot Rolled
ASTM A240 Grade 304, 304L, 304H, 309, 309S, 310, 310S, 316, 316L, 316H, 321, 321H, 347, 347H
ASTM A240 Grade 304LN, 316LN, 317LN, 304 LN, 316 LN, 317 LN
AISI Grade 309 UNS S30900, 309S UNS S30908, 309H UNS S30909, 310 UNS S31000, 310S
UNS S31008, 310H UNS S31009, 310Si Din 1.4841, 309Si Din 1.4828 X15CrNiSi20-12 EN10095
UGINOX R20-12, CRONIFER-2012, AVESTA-4828, OUTOKUMPU-4828, DIN-1.4828 EN-10095
ASTM A387 Grade 2, 5, 7, 9, 11, 12, 21, 22 Cl.1, Cl.2
ASTM A36, IS2062 Grade A, IS2062 Grade B, SS400, S235JR, S275JR
IS-2062 E 250 A (Fe 410W A), E 250 B (Fe 410W B), E 300 (Fe 440), E 350 (Fe 490), E 410 (Fe 540)
IS2062 E-250A (Fe-410W A), E-250B (Fe-410W B), E-300 (Fe-440), E-350 (Fe-490), E-410 (Fe-540)
High Tensile IS 8500 Grade FE 490B, IS 8500 Grade FE 570B, IS-8500 Gr.490B, 570B
ASTM A572 Grade-50, SA572 Gr.50, S355J2, S355J2+N, S355J2N, S355J0 EN-10025
ASTM A573 Grade 58, Grade 65, Grade 70, ASTM A573-58, A573-65, A573-70
LRS Grade A, ABS Grade A, GL Grade A, DNV Grade A, ABS Grade A for Shipbuilding
AH-36, DH-36, EH-36 Approved & Certified by LRS, DNV, GL, ABS
ASTM A36/A36M, JIS G3101 SS400, DIN 17100 St44-2, S275JR, DIN 17100 St37-2, S235JR
ASTM A283 Grade C, JIS G 3101 SS 400, DIN17100 ST44-2, S275 JR, ST 37-2, S235 JR
ASTM A 283/A 283M Grade A, Grade B, Grade C, Grade D for Low and Intermediate Tensile Strength
ASTM A515 Grade 55, ASTM A515 Grade 60, ASTM A515 Grade 65,
ASTM A515 Grade 70, ASTM A515 Grade 70N (Normalized) NACE MR-0175
ASTM A515 Grade-55, ASTM A515 Grade-60, ASTM A515 Grade-65,
ASTM A515 Grade-70, ASTM A515 Grade-70N (Normalized) NACE MR-0175
ASTM A516 Grade 55, ASTM A516 Grade 60, ASTM A516 Grade 65,
ASTM A516 Grade 70, ASTM A516 Grade 70N (Normalized) NACE MR-0175
ASTM A516 Grade-55, ASTM A516 Grade-60, ASTM A516 Grade-65,
ASTM A516 Grade-70, ASTM A516 Grade-70N (Normalized) NACE MR-0175
ASTM A516-70MT LTV Normalized Condition ASTM A516M-70 MT LTV
ASTM A516 Grade 60/Grade 70 MT+LTV Normalized+Impact Tested+Vacuum Degassed
ASTM A516 Grade 60/70 Fully Killed, Normalized, Vacuum Degassed for Boiler & Pressure Vessel
ASTM A516 Grade 70 HIC Tested acc. to TM0284 (Hydrogen Induced Cracking)
ASTM A516 Gr.70 HIC & SSCC Tested, ASTM A516-70 HIC & SSCC Tested
ASTM A516 Grade 70 NACE MR-0175 HIC & SSCC Tested, SA516-70 NACE HIC+SSCC Tested
ASTM A516-70+N Nace MR-01-75 HIC (Hydrogen Induced Cracking) & SSCC Tested
SA516 Grade 60/70 HIC Tested Plate NACE TM 0284-2003, NACE MR 0175 / ISO 15156-2
SA516 Grade 60/70 SSCC Tested Plate NACE TM 0177-2005, NACE MR 0103-2007
ASTM A516/A516M Grade 60/70 Normalized & Impact Tested for Lower Temperature Services
ASTM A515/A515M Grade 60/70 A20/A20M Normalized for Higher Temperature Services
ASTM A516/A516M Grade 60N/70N A20/A20M Normalized for Low Temperature Service
SA-516-70N ASME Section II Materials Part-A Ed.2007, SA516-70 ASME-II PART-A Edition 2007
BOF Process Vacuum Degassed Fully Killed Normalized SA516-70 MT+LTV SA20/SA20M-07
Steel Making Process Basic Oxygen Furnace (BOF) + Vacuum Degassed (VD) SA516-70MT LTV
SA 516 Gr.60/70 Normalized & Stress Relieved, Killed, Fine Grain, Charpy V-notch Impact Tested
ASTM A537 Cl.1, ASTM A537 Class 1, ASTM A537 Cl.2, ASTM A537 Class 2
ASTM A841 Grade B2, ASTM A841 Grade B-2, ASTM A841 Gr.B2, ASTM A841 Gr.B-2
HARDOX-400, HARDOX-450, HARDOX-500, RAEX-400, RAEX-450, RAEX-500, HB-400
FORA-400, FORA-450, FORA-500, ABRAZO-400, ABRAZO-450, ABRAZO-500, HB-450
NICRODUR-400, NICRODUR-450, NICRODUR-500, BRINAR-400, BRINAR-450, BRINAR-500
DILLIDUR-400V, DILLIDUR-450V, DILLIDUR-500V, AR-400, AR-450, AR-500, HB-500
S690 QL, MAXIL-690, NAXTRA-70, DILLIMAX-690T, SUPRALSIM-690, WELDOX-700E
S700 MC, DOMEX-500 MC, DOMEX-700 MC, DOMEX-100 XF, DOMEX-100XF, DOMEX XF 100
ASTM A 514 Grade B High Yield Strength Quenched & Tempered Alloy Steel Plate for Structural Steel
ASTM A 517 Grade B High Yield Strength Quenched & Tempered Alloy Steel Plate for Pressure Vessel
SAILHARD, TISCRAL, JISCRAL, LAS07 Wear Resistant Steel Abrasion Resistant Steel
TATA STEEL TISTEN-52, TISTEN-55, TISTEN-55SPL, IS-8500 Fe-540B High Tensile Steel
200BHN, 250BHN, 400BHN, 450BHN, 500BHN Wear Abrasion Resistant Steel
200HBW, 250HBW, 400HBW, 450HBW, 500HBW Abrasion Resistant Wear Steel
ARMOX-500, ARMOX-500T, RAMOR-500, ARMOUR for Ballistic Protection
ARMOR High Ballistic Steel MIL-A 46100 MIL-A12560 ARMOX 500T RAMOR 500
MIL A-46100 MIL A-12560 MIL-A-46100 MIL-A-12560 High Ballistic Steel Armor
ASTM A537 Class I, ASTM A537 Class-I, ASTM A537 Class II, ASTM A537 Class-II
MANGANESE STEEL PLATES, X120MN12, X120Mn12, DIN 1.3401, 12-14% MANGANESE
HADFIELD STEEL PLATES, X120Mn12 Din 1.3401, 12-14% Mn Steel, 11-14% Mn Steel
SAILMA-300, SAILMA-300HI, SAILMA-350, SAILMA-350HI High Tensile High Yield Strength
SAILMA-410, SAILMA-410HI, SAILMA-450, SAILMA-450HI High Tensile High Yield Strength
300 Mpa, 350 Mpa, 355 Mpa, 410 Mpa, 450 Mpa, 500 Mpa, 550 Mpa High Yield Strength Steel
52 KSI, 56 KSI, 60 KSI, 65 KSI, 70 KSI, 80 KSI, 90 KSI, 100 KSI, 110 KSI YIELD STRENGTH
S355J2+N EN10025, EN10029 Table 1 Class A, B, EN 10163-2 Part 2 Class I, B Subclass 1
S355J2G3 acc. to EN-10025, EN-10029, EN-10163 Part-2 Normalized Vacuum Degassed
S355J2G3 acc. to EN10025, S355J2G3 acc. to EN 10025, S355J2G3 EN-10025
ST52-3 acc. to EN17100, ST 52-3 acc. to DIN17100, ST52-3 DIN 17100, St52-3 DIN-17100
St50-2, St60-2, St70-2 DIN 17100 St 50-2, St 60-2, St 70-2 DIN-17100
S235JR, S235JR+AR, S235JO, S235JO+N, S235J2, S235J2+N acc. to EN 10025-2
S275JR, S275JR+AR, S275JO, S275JO+N, S275J2, S275J2+N acc. to EN 10025-2
S355JR, S355JR+AR, S355JO, S355JO+N, S355J2, S355J2+N acc. to EN 10025-2
EN10025-3 Grade S275N, S275NL, S355N, S355NL, S420N, S420NL, S460N, S460NL
EN10028-3 Grade P275NH, P275NL1, P275NL2, P355N, P355NH, P355NL1
EN10028-3 Grade P355NL2, P460NH, P460NL1, P460NL2 FINE-GRAINED STEEL
EN10028-2 Grade P235GH, P265GH, P295GH, P355GH PRESSURE VESSEL STEEL
CORTEN A, B, C ASTM A 242, ASTM A 588, ASTM A 871, ASTM A 852, ASTM A 441, IS 513
CORTEN-A, CORTEN-B, CORTEN-C, COR-TEN A, COR-TEN B, COR-TEN C Cold Rolled Steel
Corten A Din 1.8946 EN10025-5 S355JOWP, Corten B Din 1.8963 EN10025-5 S355JOW / S355J2W
CORTEN-A/COR-TEN A Weather Resistant Structural Steel ASTM A-242 S355J0WP/S355J0WP+N
CORTEN-B/COR-TEN B Atmospheric Corrosion Resistant Steel ASTM A-588 S355J2W+N
15 Mo 3 acc. to EN10028-2, 15Mo3 EN 10028-2, 15Mo3 acc. to EN 10028
16 Mo 3 acc. to EN10028-2, 16Mo3 EN 10028-2, 16Mo3 acc. to EN 10028
ASTM A204 Grade A, ASTM A204 Grade B
ASTM A203 Grade A, ASTM A203 Grade B
EN-14A, EN-14, SAE1524, AISI-1524, EN14A, EN14 Carbon-Manganese Steel
SUP6, SUP7, SUP9, SUP10, SUP11, EN45A, EN47, EN48 Round Edge Spring Steel Flat Bar
55Si7, 65Si7, AISI 5160, SAE5160, AISI 6150, SAE6150 Silicon Manganese Spring Steel Flat Bar
API5L X42, API5L X46, API5L X52, API5L X56, API5L X60, API5L X65,API5L X70
API 5LX-42, API 5LX-46, API 5LX-52, API 5LX-56, API 5LX-60, API 5LX-65, API 5LX-70
API2H Grade 42, API2H Grade 50 Carbon Manganese Steel Plates for Offshore Platform
Duplex 2205, Duplex SAF 2205, Duplex SAF2205, Duplex UNS S31803, Din 1.4462 EN10088 F51
Duplex SAF2205 SANMAC, URANUS 45N, PREN=33, PREN=34, PREN=35, PREN=36 DIN 1.4462
Duplex-2205 UNS S31803 / UNS S32205 DIN-1.4462 EN 10088-3 PREN = 33, PREN = 34, PREN = 35
Super Duplex 2507, Super Duplex SAF 2507, Super Duplex SAF-2507, Super Duplex UNS S32750 F53
Super Duplex SAF 2507 UNS S32750 DIN 1.4410 EN-10088 URANUS 47N(+) PREN>41 F-53
Super Duplex UNS S32760 F-55 ASTM A182 F55 SA182 F-55 DIN 1.4501 UNS 32760 F55
Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0103 / NACE MR-0175 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-WO, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, API 6A (American Petroleum Institute), with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3
