Home
Company Profile
E-Mail Address
Product Catalog
Pipe/Tube
Hollow Section
Fitting/Flange
Sheet/Plate/Coil
Hot Rolled Steel Plate
Hot Rolled Steel Sheet
Hot Rolled Coil
Rod/Bar/Wire Rod
Bars For Oil & Gas
Forged Round Bar
Hexagonal Bar
Square Bar
Cold Drawn Bar
Forged Block/Circle
Structural Steel
Flat Bar/Strip
Stud/Bolt/Nut
Threaded Bar/Rod
Fastener
SA193 B7 Stud Bolt
SA193 B16 Stud Bolt
SA194 2H HEX NUT
Corten-A/Corten-B
SAILCOR IRSM41-97
Spring Steel Bar
Boiler/PVQ Plate
Structural Plate
Alloy Steel Plate
Ship Building Plate
LR Grade A/B Plate
ABS Grade A/B Plate
DNV Grade A/B Plate
BV Grade-A/B Plate
SABS 1431:1987 Steel
Q&T Steel Plate
Plates Size & Grade
SA516 60/70 HIC Plate
ASTM A516-60/70 Plate
ASTM A515-60/70 Plate
ST 52-3 DIN 17100
S355J2G3 EN 10025-2
S355K2G3 EN 10025-2
S355J2+N EN 10025-2
S355K2+N EN 10025-2
EN10025-2 Plate
EN10028-2/3 Plate
Abrasion Resistant Steel
Wear Resistant Steel
Hardox 400/450 Plate
Hardox 500/600 Plate
Weldox 700 Plate
SAILMA-350/350HI Plate
SAILMA-410/410HI Plate
SAILMA-450/450HI Plate
Seamless Pipe/Tube
Welded Pipe/Tube
ERW/EFW Pipe/Tube
SAW/HFW Pipe
ASME SA234/ASTM A234
ASME SA403/ASTM A403
ASME SA420/ASTM A420
ASME SA860/ASTM A860
Long Radius Bend
Hot Induction Bend
Forged Fitting
Forged Flange
API-5L Line Pipe
API-5L Gr.B PSL-1/2 Pipe
API-5L X-42 PSL-1/2 Pipe
API-5L X-46 PSL-1/2 Pipe
API-5L X-52 PSL-1/2 Pipe
API-5L X-56 PSL-1/2 Pipe
API-5L X-60 PSL-1/2 Pipe
API-5L X-65 PSL-1/2 Pipe
API-5L X-70 PSL-1/2 Pipe
High Speed Steel
Cold Work Tool Steel
Hot Work Tool Steel
Plastic Moulding Steel
BS 970 Specification
SAE Specification
JIS Specification
ASTM Standard Spec
ASME Standard Spec
Aerospace Alloy Spec
Equivalent Grade
Equivalent Grade
Equivalent Standard
Equivalent Standard
Technical Specification
DIN Material No.
Mechanical Properties
Mechanical Properties
Chemical Composition
Density
Contact Us
E-Mail Address
Links
News

Product Catalog 

Cold Rolled 16MnCr5 Steel Strips for Fine Blanking

  • Cold Rolled 16MnCr5 Steel Strips for Fine Blanking
  • Cold Rolled 16MnCr5 Steel Strips for Fine Blanking
  • Cold Rolled 16MnCr5 Steel Strips for Fine Blanking
  • Cold Rolled 16MnCr5 Steel Strips for Fine Blanking
  • Cold Rolled 16MnCr5 Steel Strips for Fine Blanking
  • Cold Rolled 16MnCr5 Steel Strips for Fine Blanking
  • Cold Rolled 16MnCr5 Steel Strips for Fine Blanking
  • Cold Rolled 16MnCr5 Steel Strips for Fine Blanking
  • Cold Rolled 16MnCr5 Steel Strips for Fine Blanking
  • Cold Rolled 16MnCr5 Steel Strips for Fine Blanking
Model No.︰16MnCr5 Strips
Brand Name︰Cold Rolled 16MnCr5 Steel Strips for Fine Blanking
Country of Origin︰India
Unit Price︰-
Minimum Order︰-
Share on:

 Total 318 Related Items 
Prev12345Next

Product Description

Cold Rolled 16MnCr5 Steel Strips for Fine Blanking

We are Manufacture, Stockholder & Distributors of 16MnCr5 Cold Rolled Steel Strips, Coils, Slitting Coils, Slitting Strips, 16MnCr5 Cold Rolled Annealed Strip, Coil, Slitting-Coil, Slitting-Strip, 16MnCr5 Cold Rolled Narrow Steel Strips, Coils, 16MnCr5 Cold Rolled Bright Finish Strips, Coils, 16MnCr5 Cold-Rolled Precision Steel Strip, Coil, 16MnCr5 DIN EN 10084 C.R Strip, Coil, 16MnCr5 DIN EN 10132-2 C.R Strip, Coil,  16MnCr5 Low Carbon Steel Strip, Coil, 16MnCr5 C.R Strip for Fine Blanking, 16MnCr5 C.R Annealed Strip for Cold Forming, DIN 1.7131 Cold Rolled Steel Strips, Coils, 16MnCr5 Fine-Blanking Parts, 16MnCr5 Cold-Formed Parts, 16MnCr5 Precision Parts, 16MnCr5 Cold-Rolled Precision Strips, Coils, 16MnCr5 Strips for Auto Parts, 16MnCr5 Strips for Automotive Parts, 16MnCr5 for Automotive Parts, 16MnCr5 Components, 16MnCr5 Case Hardening Steel, Case-Hardening Strips

 

Manufacture of 16MnCr5 Cold Rolled Steel Strips, Coils
Manufacture of 16MnCr5 Cold Rolled Steel Annealed Strip, Coil
Manufacture of 16MnCr5 Cold Rolled Bright Steel Strips, Coils
Manufacture of 16MnCr5 Cold Rolled Bright Surface Steel Strip, Coil
Manufacture of 16MnCr5 Cold-Rolled Steel Slitting Strips, Coils
Manufacture of 16MnCr5 Cold-Rolled Steel Strips, Coils for Fine Blanking
Manufacture of 16MnCr5 Cold Rolled Steel Strip, Coil for Fine-Blanking
Manufacture of 16MnCr5 Cold-Rolled Steel Strips, Coils for Auto Parts
Manufacture of 16MnCr5 Cold Rolled Steel Strip, Coil for Automobile Parts
Manufacture of 16MnCr5 Cold-Rolled Narrow Steel Strips, Coils
Manufacture of 16MnCr5 Cold Rolled Narrow Precision Steel Strip, Coil
Manufacture of 16MnCr5 Case Hardening Steel Strips, Coils
Manufacture of 16MnCr5 Case-Hardening Steel Strip, Coil
Manufacture of 16MnCr5 DIN EN 10084 Cold Rolled Steel Strips, Coils
Manufacture of 16MnCr5 DIN EN 10084 Cold-Rolled Steel Strip, Coil
Manufacture of 16MnCr5 DIN EN 10132-2 Cold Rolled Steel Strips, Coils
Manufacture of 16MnCr5 DIN EN 10132-2 Cold-Rolled Steel Strip, Coil
Manufacture of 16MnCr5 Cold Rolled Annealed Steel Strips, Coils
Manufacture of 16MnCr5 Cold-Rolled Annealed Steel Strips, Coils
Manufacture of 16MnCr5 Cold Rolled Steel Strips, Coils for Plate Springs
Manufacture of 16MnCr5 Cold-Rolled Steel Strip, Coil for Plate Spring
Manufacture of 16MnCr5 Cold Rolled Steel Strips, Coils for Clutch Disks
Manufacture of 16MnCr5 Cold-Rolled Steel Strip, Coil for Clutch Disc
Manufacture of 16MnCr5 Cold Rolled Steel Strips, Coils for Cold Forming
Manufacture of 16MnCr5 Cold Rolled Steel Strip, Coil for Cold-Forming
Manufacture of 16MnCr5 Cold Rolled Bright Annealed Strips, Coils
Manufacture of 16MnCr5 Cold-Rolled Bright-Annealed Strip, Coil
Manufacture of DIN 1.7131 EN-10084 C.R Strips, Coils
Manufacture of DIN 1.7131 EN-10132-2 C.R Strip, Coil
Stockholder of 16MnCr5 Cold Rolled Steel Strips, Coils
Stockholder of 16MnCr5 Cold Rolled Steel Annealed Strip, Coil
Stockholder of 16MnCr5 Cold Rolled Bright Steel Strips, Coils
Stockholder of 16MnCr5 Cold Rolled Bright Surface Steel Strip, Coil
Stockholder of 16MnCr5 Cold-Rolled Steel Slitting Strips, Coils
Stockholder of 16MnCr5 Cold-Rolled Steel Strips, Coils for Fine Blanking
Stockholder of 16MnCr5 Cold Rolled Steel Strip, Coil for Fine-Blanking
Stockholder of 16MnCr5 Cold-Rolled Steel Strips, Coils for Auto Parts
Stockholder of 16MnCr5 Cold Rolled Steel Strip, Coil for Automobile Parts
Stockholder of 16MnCr5 Cold-Rolled Narrow Steel Strips, Coils
Stockholder of 16MnCr5 Cold Rolled Narrow Precision Steel Strip, Coil
Stockholder of 16MnCr5 Case Hardening Steel Strips, Coils
Stockholder of 16MnCr5 Case-Hardening Steel Strip, Coil
Stockholder of 16MnCr5 DIN EN 10084 Cold Rolled Steel Strips, Coils
Stockholder of 16MnCr5 DIN EN 10084 Cold-Rolled Steel Strip, Coil
Stockholder of 16MnCr5 DIN EN 10132-2 Cold Rolled Steel Strips, Coils
Stockholder of 16MnCr5 DIN EN 10132-2 Cold-Rolled Steel Strip, Coil
Stockholder of 16MnCr5 Cold Rolled Annealed Steel Strips, Coils
Stockholder of 16MnCr5 Cold-Rolled Annealed Steel Strips, Coils
Stockholder of 16MnCr5 Cold Rolled Steel Strips, Coils for Plate Springs
Stockholder of 16MnCr5 Cold-Rolled Steel Strip, Coil for Plate Spring
Stockholder of 16MnCr5 Cold Rolled Steel Strips, Coils for Clutch Disks
Stockholder of 16MnCr5 Cold-Rolled Steel Strip, Coil for Clutch Disc
Stockholder of 16MnCr5 Cold Rolled Steel Strips, Coils for Cold Forming
Stockholder of 16MnCr5 Cold Rolled Steel Strip, Coil for Cold-Forming
Stockholder of 16MnCr5 Cold Rolled Bright Annealed Strips, Coils
Stockholder of 16MnCr5 Cold-Rolled Bright-Annealed Strip, Coil
Stockholder of DIN 1.7131 EN-10084 C.R Strips, Coils
Stockholder of DIN 1.7131 EN-10132-2 C.R Strip, Coil
Distributor of 16MnCr5 Cold Rolled Steel Strips, Coils
Distributor of 16MnCr5 Cold Rolled Steel Annealed Strip, Coil
Distributor of 16MnCr5 Cold Rolled Bright Steel Strips, Coils
Distributor of 16MnCr5 Cold Rolled Bright Surface Steel Strip, Coil
Distributor of 16MnCr5 Cold-Rolled Steel Slitting Strips, Coils
Distributor of 16MnCr5 Cold-Rolled Steel Strips, Coils for Fine Blanking
Distributor of 16MnCr5 Cold Rolled Steel Strip, Coil for Fine-Blanking
Distributor of 16MnCr5 Cold-Rolled Steel Strips, Coils for Auto Parts
Distributor of 16MnCr5 Cold Rolled Steel Strip, Coil for Automobile Parts
Distributor of 16MnCr5 Cold-Rolled Narrow Steel Strips, Coils
Distributor of 16MnCr5 Cold Rolled Narrow Precision Steel Strip, Coil
Distributor of 16MnCr5 Case Hardening Steel Strips, Coils
Distributor of 16MnCr5 Case-Hardening Steel Strip, Coil
Distributor of 16MnCr5 DIN EN 10084 Cold Rolled Steel Strips, Coils
Distributor of 16MnCr5 DIN EN 10084 Cold-Rolled Steel Strip, Coil
Distributor of 16MnCr5 DIN EN 10132-2 Cold Rolled Steel Strips, Coils
Distributor of 16MnCr5 DIN EN 10132-2 Cold-Rolled Steel Strip, Coil
Distributor of 16MnCr5 Cold Rolled Annealed Steel Strips, Coils
Distributor of 16MnCr5 Cold-Rolled Annealed Steel Strips, Coils
Distributor of 16MnCr5 Cold Rolled Steel Strips, Coils for Plate Springs
Distributor of 16MnCr5 Cold-Rolled Steel Strip, Coil for Plate Spring
Distributor of 16MnCr5 Cold Rolled Steel Strips, Coils for Clutch Disks
Distributor of 16MnCr5 Cold-Rolled Steel Strip, Coil for Clutch Disc
Distributor of 16MnCr5 Cold Rolled Steel Strips, Coils for Cold Forming
Distributor of 16MnCr5 Cold Rolled Steel Strip, Coil for Cold-Forming
Distributor of 16MnCr5 Cold Rolled Bright Annealed Strips, Coils
Distributor of 16MnCr5 Cold-Rolled Bright-Annealed Strip, Coil
Distributor of DIN 1.7131 EN-10084 C.R Strips, Coils
Distributor of DIN 1.7131 EN-10132-2 C.R Strip, Coil

 

Heat treatment process for automobile synchronizer ring gear cold rolling alloy-steel strip 16MnCr5

The invention discloses a heat treatment process for an automobile synchronizer ring gear cold rolling
alloy-steel strip 16MnCr5. The cold rolling alloy-steel strip 16MnCr5 comprises, by mass, 0.14-0.19% of C,
no larger than 0.4% of Si, 1.00-1.30% of Mn, 0.80-1.10% of Cr, no larger than 0.035% of P and no larger than
0.035% of S. According to the heat treatment process, small-deformation rolling in 7-12 passes and 1-2 times
of heat treatment annealing process enable a steel strip structure to gradually change to obtain a metallographic
structure meeting fine blanking requirements, so that the ultimate object of replacing copper with steel is achieved;
and the steel strip not only has the softness of a copper ring gear in property, but also is higher than the copper
ring gear in intensity and abrasive resistance, the service life of an automobile ring gear is further prolonged,
cost is further lowered, and a large quantity of non-ferrous metals are spared for the country.

16MnCr5 Grade Cold Rolled Steel Strip supply according to EN 10132-2 annealed and skin passed in coils or
cut to length depends on customer demand.

16MnCr5 Grade Cold Rolled Steel Strip Usage Areas:
This grade mainly preferred for parts cold forming and case hardening process, especially automotive industry.

EN 10132-2 Grade 16MnCr5 soft annealed or soft annealed and skin passed (+A or +A+LC)

Description
Cold-rolled narrow strip made of the alloy steel 16MnCr5 will be delivered in thicknesses up to 10 mm for
case hardening in following conditions: - soft annealed or soft annealed and little rerolled (+A or +LC),
- cold rolled (+CR).

16MnCr5 Case-hardened steels
Material no. 1.7131 according to DIN EN 10084

Usage
When either hot- or cold-rolled, casehardened steels are predominantly used for transmission parts
(plate springs, clutch disks). The hot-rolled steels offer good punching quality and formability. After
case-hardening, the finished components have a very strong core, whereas the surface is characterised by
good wear resistance.
As the melting and hot-rolling conditions have an effect on further treatment at the customer, the customer
should always state the intended use when placing an order

Condition of delivery, scope of testing and certificate
The provisions of EN 10084, chapters 6.4.1 and 7 shall apply for delivery and inspection. All case-hardened
steels are delivered in a hot-rolled and untreated condition.

16MNCR5, 1.7131, 20MNCR5, 1.7147 – CASE-HARDENING STEEL ACCORDING TO ISO 683-3:2016 AND EN 10084:2008

Case-hardening steels For components with high toughness and hard wearing surfaces Delivery pursuant to EN 10132-2

Case-hardening steels
The C content for optimized machining and forming lies between 0.07% and 0.20%. In order to achieve the desired
properties, a high degree of hardness in the case and usually a tough core, the surface area must be enriched with
carbon, hardened and perhaps tempered or stress-relieved. Carbon enrichment is accomplished in the course of
component manufacturing by means of carburization. Carbonitriding is carried out when nitrogen enrichment is required.

EN 1.7131 Steel 16MnCr5 Material
EN 1.7131 steel (16MnCr5 material) is an European standard carburized steel (case hardening steel) with good
hardenability and machinability. For larger cross-section parts, high surface hardness and wear resistance can be
obtained after heat treatment, and low-temperature impact toughness is also high. For specification and datasheet,
please see the tables below.

16MnCr5 steel is generally used after carburizing and quenching, and is mainly used for manufacturing gears, worms,
sealing bushings and other components.

Mechanical Properties of 1.7131 Steel (16MnCr5 Material)
1.7131 material, 16MnCr5 steel Brinell hardness
Soft annealed: ≤ 207 HBW
Treated to hardness: 156-207 HBW
Treated to ferrite-pearlite structure and hardness: 140-187 HBW
Normalized: 138-187 HBW

Heat Treatment Specification of 16MnCr5 (1.7131 Steel)
End quench test Austenitizing temperature: 870℃ (30-35 minutes)
Carburizing temperature: 880-980 ℃
Core-hardening temperature: 860-900 ℃
Case-hardening temperature: 780-820 ℃
Tempering: 150 – 200 ℃ (≥ 1 hour)

Case hardening steel 16MnCr5 (Euro norm: EC80)
Case hardening steels are mostly used in the area of engineering for parts subject to higher stress and higher core
strength, e.g. for measuring tools, joints and gears. Case hardening steel has a hard edge layer and a resistant core

 

Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0103 / NACE MR-0175 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-WO, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2015, API 6A (American Petroleum Institute), with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS (Indian Register of Shipping), NORSOK Approved Standard M-630, M-650 Rev.3                     
 

If you have any requirement of above items, please feel free to contact us


Regards,


CONTACT PERSON :

 


MUKESH SHAH                     
Director                      
Mobile No. 0091 - 9820292499                      
Email - 
marketing@rolexmetals.com


ROLEX METAL DISTRIBUTORS                      
( A METAL & STEEL Company )                      
57-A, KHATARGALLI,                      
THAKURDWAR,                      
MUMBAI - 400002, INDIA.                      
TEL.No. 0091-22-23858802                      
TEL.No. 0091-22-23823963                      
FAX No. 0091-22-23898724                      
Email - 
marketing@rolexmetals.com                      
Website – www.rolexmetals.com

                      
 

CHAIRMAN – chairman@rolexmetals.com

MANAGING DIRECTOR – managingdirector@rolexmetals.com

TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com

SALES DIRECTOR – salesdirector@rolexmetals.com

COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com

 

COMMERCIAL MANAGER – commercial@rolexmetals.com

GENERAL MANAGER – generalmanager@rolexmetals.com

SALES MANAGER – salesmanager@rolexmetals.com

PURCHASE MANAGER – purchasemanager@rolexmetals.com

TECHNICAL MANAGER – technical@rolexmetals.com

WORKS MANAGER – worksmanager@rolexmetals.com

STORES MANAGER – stores@rolexmetals.com

WAREHOUSE MANAGER – warehouse@rolexmetals.com

SALES DOMESTIC – salesdomestic@rolexmetals.com

SALES INTERNATIONAL – salesinternational@rolexmetals.com

SALES GENERAL – sales@rolexmetals.com

PURCHASE GENERAL – purchase@rolexmetals.com

FINANCE MANAGER – finance@rolexmetals.com

ACCOUNTS MANAGER – accounts@rolexmetals.com

GENERAL INFORMATION – info@rolexmetals.com

 

EXPORT MANAGER – export@rolexmetals.com

IMPORT MANAGER – import@rolexmetals.com

AIR EXPORT – airexport@rolexmetals.com

SEA EXPORT – seaexport@rolexmetals.com

CUSTOMS – customs@rolexmetals.com

 

AIR FREIGHT – airfreight@rolexmetals.com

SEA FREIGHT – seafreight@rolexmetals.com

DESPATCH – despatch@rolexmetals.com

INSPECTION – inspection@rolexmetals.com

LOGISTICS – logistics@rolexmetals.com

TRANSPORT – transport@rolexmetals.com

 

KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com

TALOJA WAREHOUSE – taloja@rolexmetals.com

KHOPOLI WAREHOUSE – khopoli@rolexmetals.com

NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com

KANDLA WAREHOUSE – kandla@rolexmetals.com

MUMBAI WAREHOUSE – mumbai@rolexmetals.com

STOCKYARD – stockyard@rolexmetals.com

 

SERVICE – service@rolexmetals.com

SUPPORT – support@rolexmetals.com

RECRUITMENT – career@rolexmetals.com

WEBMASTER – webmaster@rolexmetals.com

CUSTOMER CARE – customercare@rolexmetals.com

 

 

Product Image











Related Products
High Carbon Steel Wire Rod Grade 71/75 76/80 81/85
High Carbon Steel Wire Rod Grade 71/75 76/80 81/85
Titanium Nitride (TiN) PVD Coating
Titanium Nitride (TiN) PVD Coating
Medium Carbon Steel EN9 EN-9 C-50 C-55
Medium Carbon Steel EN9 EN-9 C-50 C-55
Medium Carbon Steel EN-8 EN-8D C-40 C-45
Medium Carbon Steel EN-8 EN-8D C-40 C-45

Home  |  Company Profile  |  E-Mail Address  |  Product Catalog  |  Pipe/Tube  |  Hollow Section  |  Fitting/Flange  |  Sheet/Plate/Coil  |  Hot Rolled Steel Plate  |  Hot Rolled Steel Sheet  |  Hot Rolled Coil  |  Rod/Bar/Wire Rod  |  Bars For Oil & Gas  |  Forged Round Bar  |  Hexagonal Bar  |  Square Bar  |  Cold Drawn Bar  |  Forged Block/Circle  |  Structural Steel  |  Flat Bar/Strip  |  Stud/Bolt/Nut  |  Threaded Bar/Rod  |  Fastener  |  SA193 B7 Stud Bolt  |  SA193 B16 Stud Bolt  |  SA194 2H HEX NUT  |  Corten-A/Corten-B  |  SAILCOR IRSM41-97  |  Spring Steel Bar  |  Boiler/PVQ Plate  |  Structural Plate  |  Alloy Steel Plate  |  Ship Building Plate  |  LR Grade A/B Plate  |  ABS Grade A/B Plate  |  DNV Grade A/B Plate  |  BV Grade-A/B Plate  |  SABS 1431:1987 Steel  |  Q&T Steel Plate  |  Plates Size & Grade  |  SA516 60/70 HIC Plate  |  ASTM A516-60/70 Plate  |  ASTM A515-60/70 Plate  |  ST 52-3 DIN 17100  |  S355J2G3 EN 10025-2  |  S355K2G3 EN 10025-2  |  S355J2+N EN 10025-2  |  S355K2+N EN 10025-2  |  EN10025-2 Plate  |  EN10028-2/3 Plate  |  Abrasion Resistant Steel  |  Wear Resistant Steel  |  Hardox 400/450 Plate  |  Hardox 500/600 Plate  |  Weldox 700 Plate  |  SAILMA-350/350HI Plate  |  SAILMA-410/410HI Plate  |  SAILMA-450/450HI Plate  |  Seamless Pipe/Tube  |  Welded Pipe/Tube  |  ERW/EFW Pipe/Tube  |  SAW/HFW Pipe  |  ASME SA234/ASTM A234  |  ASME SA403/ASTM A403  |  ASME SA420/ASTM A420  |  ASME SA860/ASTM A860  |  Long Radius Bend  |  Hot Induction Bend  |  Forged Fitting  |  Forged Flange  |  API-5L Line Pipe  |  API-5L Gr.B PSL-1/2 Pipe  |  API-5L X-42 PSL-1/2 Pipe  |  API-5L X-46 PSL-1/2 Pipe  |  API-5L X-52 PSL-1/2 Pipe  |  API-5L X-56 PSL-1/2 Pipe  |  API-5L X-60 PSL-1/2 Pipe  |  API-5L X-65 PSL-1/2 Pipe  |  API-5L X-70 PSL-1/2 Pipe  |  High Speed Steel  |  Cold Work Tool Steel  |  Hot Work Tool Steel  |  Plastic Moulding Steel  |  BS 970 Specification  |  SAE Specification  |  JIS Specification  |  ASTM Standard Spec  |  ASME Standard Spec  |  Aerospace Alloy Spec  |  Equivalent Grade  |  Equivalent Grade  |  Equivalent Standard  |  Equivalent Standard  |  Technical Specification  |  DIN Material No.  |  Mechanical Properties  |  Mechanical Properties  |  Chemical Composition  |  Density  |  Contact Us  |  E-Mail Address  |  Links  |  News  |  Sitemap  |  Mobile Version
Powered by DIYTrade.com